Lancashire · England
Non-slip bath & shower coating in Huncoat, Lancashire
Non-slip bath coating for Huncoat, without a refit. Send us photos for a fixed quote, then book a visit.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Non-slip bath coating at your home in Huncoat
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We regularly repair shower trays, wet room floors (ask us) and enamelled baths, and people most often call us about bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Huncoat (BB5)
- Region
- Lancashire
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Huncoat
What else we do in Huncoat
FAQs for Huncoat
What happens after I send pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Will I see the coating?
Very little: the treated area looks slightly matt.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Huncoat clients choose us
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- One price list for the entire UK
- A year’s guarantee on all work
Take a look at our full price list.
Work for landlords and builders
Landlords, letting agents and housing providers in Huncoat use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Shower trays
- Enamelled baths
How we price non-slip bath coating
A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The material
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Send photos for a quote
You can normally get a fixed price without us visiting. To make it quick:
- A wider photo showing the entire bath or shower tray
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Details of any past repairs
If you’re in Huncoat and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Common problems we fix in Huncoat
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
What to look for in a quote
- Whether a trained technician does the job
- Aftercare advice
- If travel is included in the price
- What prep work is covered
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Point us to the nearest place to park
Getting a price
Upload pictures of the damage and a wider shot of the whole item, with your BB5 postcode, and we will reply with a fixed quote.
Read more
About Huncoat
Huncoat is about 2 miles north-east of Accrington, in Lancashire. Across the BB5 area, a technician comes to you. We cover 482 places in Lancashire, from the larger towns to small villages. You can also see our page for Manchester, about 21 miles away.
All of BB5 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Station Road, Lynwood Road and The Crofts and the roads around them. We also cover the places around Huncoat: Altham (1 mile north), Hapton (1 mile north-east), Accrington (2 miles south-west), Clayton-le-Moors (2 miles west) and Church (2 miles south-west). We also work in nearby towns such as Preston (14 miles west), Burnley (4 miles east), Chorley (14 miles south-west), Bamber Bridge (13 miles west), Leyland (15 miles west) and Fulwood (15 miles west).
Near you in Huncoat
Locally, our jobs take us to homes close to Accrington Huncoat Primary School, Church of St Augustine (Of Hippo) and Accrington Academy. Huncoat has its own railway station: Huncoat station. A little further out are Hapton Castle (1 mile north-east) and Mercer Museum And Art Gallery (2 miles west). For a walk, there is Hameldon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
