Cornwall · England
Non-slip bath & shower coating in Insworke, Cornwall
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Insworke. Free, fixed quotes from your pictures.
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
When to call us in Insworke
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The most common problems we’re called about are:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What to look for in a quote
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- If travel is included in the price
Non-slip bath coating at your home in Insworke
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you’re dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Insworke (PL10)
- Region
- Cornwall
- Warranty
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Other services in Insworke
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
Related advice
What non-slip bath coating costs
We charge the same across the UK, including Insworke. What changes the price is:
- How hard the colour is to match
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How many items we do on one visit
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- One picture of the whole bath or shower tray
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Something in shot to show the size
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Our work in Insworke
Insworke is about 3 miles south-west of Stonehouse, in Cornwall. Our technicians come to customers in Insworke and nearby villages, so there is no workshop to go to. Insworke is one of 644 places in Cornwall where we work.
Our technicians cover all of PL10 and the streets around it. That includes homes on Mill Road, Millpool Road and St John's Road and the roads around them. We also cover the places around Insworke: Southdown (1 mile east), Millbrook (1 mile south), St John (1 mile north-west), Kingsand (1 mile south) and Cawsand (2 miles south). Further out, we also cover Stonehouse (3 miles north-east), Saltash (4 miles north), Liskeard (13 miles north-west), Addington (13 miles north-west), Looe (11 miles west) and Burraton Coombe (4 miles north).
Local landmarks in Insworke
Our customers here include homes close to Church of All Saints, Torpoint Community College and Millbrook CofE Primary School and the streets around them. Insworke’s nearest station is Devonport station, roughly 2.6 miles north-east of the centre. A little further out are Trematon Castle (3.5 miles north) and Elizabethan House Museum (3.5 miles east). For a walk, there’s Penlee Battery.
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- CHAS and Constructionline accredited
- No need to remove anything
- Work done at your home or business
- No extra charge for your area
Take a look at our pricing.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Landlords, letting agents and housing providers in Insworke use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Your questions about non-slip bath coating in Insworke
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
How do I get a price for non-slip bath coating in Insworke?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
About our accreditations · Every repair comes with a one-year guarantee.
