Glasgow · Scotland
Non-Slip Bath Coating in Kelvingrove
Non-slip bath coating for Kelvingrove, without a refit. Get a fixed price from your pictures, then book a visit.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
How it works
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
How to prepare
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job without visiting.
Related advice
How we handle non-slip bath coating in Kelvingrove
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re frequently asked to fix worn-out textured areas and resurfaced baths that are now too smooth, in resurfaced baths, wet room floors (ask us) and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Kelvingrove (G3, G12, G4)
- County
- Glasgow
- Warranty
- One year on every repair
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Our work in Kelvingrove
Kelvingrove is about 1 mile north-west of Glasgow, in Glasgow. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Kelvingrove is one of 183 towns and villages in Glasgow we cover.
Postcode districts we cover here: G3, G12 and G4. Whether you live on Kent Road, Eton Lane and Park Road or a nearby road, we can come to you. We also cover the places around Kelvingrove: Finnieston (1 mile south-west), Sandyford (1 mile south-east), Kelvinhaugh (1 mile west), Woodlands (1 mile north-east) and Anderston (1 mile east). Further out, we also cover Langside (3 miles south), Yoker (4 miles north-west), Mount Florida (3 miles south), Hillpark (4 miles south), Shawlands (3 miles south) and Merrylee (4 miles south).
Local landmarks in Kelvingrove
Around Kelvingrove, we work in homes near St Vincent Street Church, Glasgow Gaelic School and Church Street Primary School and the streets around them. Also close by are College of Piping (0.6 miles north), The Hengler's Circus pub (0.7 miles east), Kelvingrove Parish Church (under half a mile north-west) and Glasgow University Library (0.5 miles north). Kelvingrove has its own railway station: Exhibition Centre station. Other landmarks nearby include Glasgow Museum of Transport (0.5 miles west) and Chinatown (0.9 miles east). For a walk, there is Hogganfield Loch.
- Local facilities include Kelvingrove Park (under half a mile north)
How we price non-slip bath coating
Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Access to the area
- Whether we combine several jobs
- What the surface is made of
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
Phone photos are fine. Just ensure we can see:
- Your postcode, so we can check dates
- One picture of the whole bath or shower tray
- Something in shot to show the size
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Do you need non-slip bath coating in Kelvingrove?
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people get in touch after spotting something like this:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Before you book anyone
- Whether they match the colour on site
- If travel is included in the price
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Repair or replace in Kelvingrove?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- A fixed quote before booking
- Normally one visit, start to finish
Read our pricing.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
Landlords, agents and businesses in Kelvingrove
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams in Glasgow and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Kelvingrove: your questions answered
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Places near Kelvingrove
Also in Kelvingrove
About our accreditations · Every repair comes with a one-year guarantee.
