Lancashire · England

Non-Slip Bath Coating for Killington homes

Clear non-slip coatings for baths and shower trays at your home in Killington, with a one-year guarantee on every repair.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Killington homes

About our non-slip bath coating in Killington

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can usually put it right.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Killington (LA6)
County
Lancashire
Warranty
A year, on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

Honest limits

It helps to know what we cannot do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

Materials we work on in Killington

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Killington and the surrounding area

Killington is about 6 miles east of Kendal, in Lancashire. Whether you’re in the middle of Killington or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 482 towns and villages across Lancashire. Our jobs stretch from Killington to Leeds (about 54 miles away).

Postcode districts we cover here: LA6. Neighbouring places we cover include Millholme (3 miles west), Sedbergh (3 miles north-east), Old Hutton (3 miles west), New Hutton (4 miles north-west) and Howgill (4 miles north). Within a short drive, we also cover Carnforth (14 miles south-west), Bolton-le-Sands (15 miles south-west), Arnside (12 miles south-west), Cragbank (14 miles south-west), Ingleton (11 miles south-east) and Kirkby Lonsdale (6 miles south).

Landmarks near Killington

Locally, our jobs take us to homes close to Church of All Saints, among other places. Further afield, we also cover the area around Westmorland General Hospital (5.6 miles west). Open spaces near Killington include Terrybank Tarn and Castle Knott.

Map of Killington © OpenStreetMap contributors

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Killington. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • One-year guarantee on every repair
  • Honest advice, even when it means no job
  • No need to remove anything
  • CHAS and Constructionline accredited

Take a look at our pricing.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

What non-slip bath coating costs

You will not pay by the hour. The price depends on:

  • Any earlier repairs that need removing first
  • Access to the area
  • The type of damage
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your pictures

Most quotes are done from pictures alone. To make it quick:

  • Details of any past repairs
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • A photo taken from further back

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote the same day in most cases.

Killington questions

Are there extra charges for Killington?

There’s no separate call-out charge. Your fixed quote includes everything.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

Do you work in Killington?

Yes, we do. Technicians travel to Killington from across the region, and the price is the same as everywhere else.

How much does non-slip bath coating cost in Killington?

We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your LA6 postcode.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Make sure the area is dry
  • Let us know if it has been repaired before

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

What we are called out for in Killington

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Get in touch if you’ve noticed any of these:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • What protection goes down before work starts
  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • How long it needs to cure

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.