Norfolk · England

Non-slip bath & shower coating in Kimberley, Norfolk

Non-slip bath coating in and around Kimberley: photo quotes, tidy work and a year’s guarantee.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Kimberley homes

Non-slip bath coating in Kimberley, done in place

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can normally put it right, on shower trays, wet room floors (ask us) and acrylic baths alike.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Kimberley (NR18)
County
Norfolk
Guarantee
12 months on all our work
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

FAQs for Kimberley

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Norfolk.

Is there a call-out fee?

We don’t add a call-out fee. The fixed price covers the visit and the work.

What we cannot put right

A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

Signs you need non-slip bath coating in Kimberley

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we are asked about most:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Before you book anyone

  • How long it needs to cure
  • What protection goes down before work starts
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?

Our hiring checklist

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Kimberley. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Kimberley customers choose us

  • No need to remove anything
  • One-year guarantee on every repair
  • We leave the room as we found it
  • Fixed prices from your pictures

Take a look at our prices page.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Covering Kimberley

Kimberley is about 3 miles north-west of Wymondham, in Norfolk. Customers in Kimberley get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Kimberley is one of 797 towns and villages in Norfolk where we work.

We work across the NR18 postcode area. If you are just outside Kimberley, we cover Wicklewood (1 mile south-east), Crownthorpe (1 mile south-east), Hackford (1 mile south-west), The Green (1 mile south) and Hardingham (2 miles west). Within a short drive, we also cover Norwich (10 miles east), Dereham (7 miles north-west), Wymondham (3 miles south-east), Sprowston (12 miles east), Thorpe St Andrew (13 miles east) and Attleborough (6 miles south).

Landmarks near Kimberley

Around Kimberley, we work in homes near Church of St Peter and Wicklewood Primary School, among other places. The closest station to Kimberley is Wymondham station, about 3.4 miles south-east of the centre. Other landmarks nearby include Bickley Day Hospital (5.4 miles south) and Wymondham Heritage Museum (3.1 miles south-east).

Map of Kimberley © OpenStreetMap contributors

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • How many areas need work
  • How easy the damage is to reach
  • The material

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Details of any past repairs
  • Natural light rather than flash
  • Your postcode, so we can check dates
  • Any details about the material

The quickest way to a price is to send two or three photos using our quote form or call us. We will say right away if a repair is the right fix.

What we do, step by step

There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Read more

Landlords, agents and businesses in Kimberley

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.