Gloucestershire · England
Non-Slip Bath Coating in Kingscote
Non-slip bath coating in Kingscote without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Signs you need non-slip bath coating in Kingscote
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted any of these:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- How to look after the finish
- When it can be used again
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
Non-slip bath coating in Kingscote without replacing anything
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can usually put it right, on enamelled baths, acrylic baths and resurfaced baths alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Kingscote (GL8)
- Area hub
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Kingscote
Also in Kingscote
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Getting ready for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
How to get a price
Most customers in Kingscote get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Repairing versus replacing in Kingscote
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Kingscote
- Every repair guaranteed for a year
- Everything repaired in place
- Free fixed quotes from pictures
- We leave the room as we found it
See our full price list.
Kingscote questions
What does non-slip bath coating cost?
We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your GL8 postcode.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens next?
We come back with a fixed price. You’re under no obligation.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Our work in Kingscote
Kingscote is about 4 miles east of Dursley, in Gloucestershire. Anywhere in GL8, we carry out the work at your property. Our repair technicians cover 470 places in Gloucestershire. We work right across the region, from Kingscote to Birmingham (about 58 miles away).
Our visits in GL8 are booked in the same way as anywhere else. Kingscote is on the A4135, which makes it straightforward to reach. Other places close to Kingscote include Owlpen (2 miles north-west), Horsley (2 miles north-east), Tiltups End (2 miles east), Barton End (2 miles north-east) and Newmarket (2 miles north-east). We also work in nearby towns such as Gloucester (13 miles north), Stroud (6 miles north), Cirencester (13 miles east), Brockworth (13 miles north), Quedgeley (11 miles north) and Lydney (12 miles west).
What’s near Kingscote
In Kingscote, that means homes near Church of St John the Baptist, Hunters Hall Inn and Lasborough Park, among other places. A little further out are Dunkirk Mill Museum (3.1 miles north-east) and Beverston Castle (3.1 miles south-east). Open spaces near Kingscote include Coaley Peak and Woodchester Park.
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- The material
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- One picture of the entire bath or shower tray
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
What a repair can’t fix
A repair is not right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Kingscote
- Resurfaced baths
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
