Gloucestershire · England

Shower Tray Repair in Kingscote

Shower tray repair for Kingscote, without a refit. Send us pictures for a fixed price, then we come to you.

  • Repairs from £95
  • Damage from a refit or building work
  • Damage around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Kingscote

Shower tray repair in Kingscote without replacing anything

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Our technicians work on ceramic, cast iron and acrylic, and people most often call us about chipped corners or rims and a cracked shower tray.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Discoloured square shower tray restored with a new white finish
Area
Kingscote (GL8)
Area hub
Gloucestershire
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Should you replace it?

The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.

Why Kingscote clients choose us

  • Free fixed quotes from pictures
  • No need to remove anything
  • Same prices wherever you are
  • One-year guarantee on every repair

Take a look at our full price list.

How to look after the repair

Once the work has cured, treat it gently:

  • Rinse the tray after each shower
  • Use the extractor fan
  • Get a moving tray checked
  • Store bottles off the tray

Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.

A tray that moves underfoot needs looking at, before it cracks.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • A tray that flexes because it was never properly supported
  • Damage below the tray that needs a builder
  • Multiple cracks across the tray

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Kingscote

  • Acrylic
  • Cast iron
  • Stone resin
  • Ceramic
  • Enamelled steel

Where we work around Kingscote

Kingscote is about 4 miles east of Dursley, in Gloucestershire. We travel to clients in Kingscote, so there’s no workshop to go to. Kingscote is one of 470 places in Gloucestershire we cover. We work right across the region, from Kingscote to Birmingham (about 58 miles away).

Every address in GL8 is covered. You will find Kingscote on the A4135, so it’s easy for us to reach. We also cover the places around Kingscote: Owlpen (2 miles north-west), Horsley (2 miles north-east), Tiltups End (2 miles east), Barton End (2 miles north-east) and Newmarket (2 miles north-east). Larger places within reach include Gloucester (13 miles north), Stroud (6 miles north), Cirencester (13 miles east), Brockworth (13 miles north), Quedgeley (11 miles north) and Lydney (12 miles west).

Near you in Kingscote

Locally, our jobs take us to homes close to Church of St John the Baptist, Hunters Hall Inn and Lasborough Park. Other landmarks nearby include Dunkirk Mill Museum (3.1 miles north-east) and Beverston Castle (3.1 miles south-east). Green spaces nearby include Coaley Peak and Woodchester Park.

Map of Kingscote © OpenStreetMap contributors

Landlords, agents and businesses in Kingscote

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, pictures and access details.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, or most of the day to resurface the whole tray. We clean up when we’re done and tell you when it’s ready to use.

  1. The surrounding area is sheeted and masked.
  2. Old sealant is removed if it’s in the way.
  3. We clean and key the tray, then repair the damage.
  4. The surface is refinished to match.
  5. We tidy up and tell you when you can shower.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Getting a price

A quote takes minutes to ask for: photograph the damage, then the whole shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Read more

Common problems we fix in Kingscote

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks generally point to an uneven base.

If you can see any of these, send us a photo:

  • Cracks running from the waste
  • Snagging damage in a new bathroom
  • Scratches in the surface
  • Damage around the waste

Questions to ask before you book

  • Whether the price covers travel
  • What preparation is included
  • How to look after the finish
  • How the colour is matched

Our hiring checklist

What your shower tray is made of matters

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. They need a flat, solid base, and we match repairs to the surface finish.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

FAQs for Kingscote

Which areas do you work in?

All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Can you quote from pictures?

Nearly always. If photos do not show enough, we will ask for another angle.

Can you make an old tray look new?

Yes. The whole tray can be resurfaced without removing it.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Do you work in Kingscote?

Yes. We cover the whole UK and come to Kingscote. Send pictures and we will quote, or call 0345 017 0787.

Can a cracked shower tray be repaired?

Frequently. A tray that moves needs its support sorting before the repair.

How long does it take to cure?

Usually the day after. We’ll tell you the exact time when we finish.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.