Coventry · England
Non-Slip Bath Coating for Kinwalsey homes
Our technicians come to Kinwalsey for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Kinwalsey
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with safety for older or less mobile people and resurfaced baths that are now too smooth, we can typically put it right, on shower trays, resurfaced baths and enamelled baths alike.
Every job is backed for twelve months in Kinwalsey and everywhere else. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Kinwalsey (CV7)
- Area hub
- Coventry
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Places near Kinwalsey
What else we do in Kinwalsey
Common problems we fix in Kinwalsey
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Comparing quotes
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- What preparation is included
- What the guarantee covers, and for how long
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Kinwalsey
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
For landlords and businesses
For anyone letting property in or around Kinwalsey, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Repairing versus replacing in Kinwalsey
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why choose Surface Doctor in Kinwalsey
- Fixed prices from your photos
- Typically one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
Read our full price list.
Kinwalsey questions
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I get a price for non-slip bath coating in Kinwalsey?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your CV7 postcode.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Kinwalsey and the surrounding area
Kinwalsey is about 6 miles west of Bedworth, in Coventry. Wherever you are in the CV7 postcode area, we carry out the work at your property. Our repair technicians cover 88 places in Coventry, from the larger towns to small villages. Our jobs stretch from Kinwalsey to Birmingham (about 11 miles away).
Our visits in CV7 work the same way as everywhere else we cover. Other places close to Kinwalsey include Chapel Green (1 mile east), Hollyberry End (1 mile south-east), Eaves Green (1 mile south), Maxstoke (2 miles north-west) and Meriden (2 miles south-west). We also work in nearby towns such as Coventry (6 miles south-east), Hillfields (6 miles south-east), Bishopsgate Green (6 miles south-east), Radford (6 miles south-east), Ernesford Grange (8 miles south-east) and Foleshill (7 miles east).
Near you in Kinwalsey
Typical jobs here are in homes near Packington Park and the streets around them. For rail, the closest station is Hampton-In-Arden station, roughly 3.9 miles south-west. Nearby you will also find Berkswell Village Museum (3.7 miles south) and Brooklands Hospital (4.9 miles west). Open spaces near Kinwalsey include Ladywalk Reserve.
How we price non-slip bath coating
You will know the full cost before you book. We look at:
- The material and finish
- How easy the damage is to reach
- How hard the colour is to match
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- One sharp close-up of the damage
- Something in shot to show the size
- What it’s made of, if you know
- Your postcode, so we can check dates
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a morning or an afternoon, including clearing up.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Getting a price
For a price in Kinwalsey, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
