Coventry · England

Non-slip bath & shower coating in Meriden, Coventry

Local non-slip bath coating for Meriden: photo quotes, tidy work and a year’s guarantee.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Meriden homes

Non-slip bath coating at your home in Meriden

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in enamelled baths, wet room floors (ask us) and shower trays.

A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Meriden (CV7)
County
Coventry
Warranty
12 months on all our work
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

Covering Meriden

Meriden is about 6 miles west of Coventry, in Coventry. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Meriden is one of 88 places in Coventry where we work. Our jobs stretch from Meriden to Birmingham (11 miles away).

Every address in CV7 is covered. Local streets include Alspath Road, Fairfield Rise and The Croft, and we cover them all. Main roads around Meriden include the B4104, which makes travel easy. Nearby, we also work in Eaves Green (1 mile east), Four Oaks (1 mile south), Millison's Wood (2 miles east), Kinwalsey (2 miles north-east) and Berkswell (2 miles south). Further out, we also cover Coventry (6 miles east), Hillfields (6 miles east), Bishopsgate Green (6 miles east), Radford (6 miles east), Ernesford Grange (8 miles east) and Foleshill (7 miles east).

Near you in Meriden

We visit homes around The Bull's Head Hotel, Meriden Church of England Primary School and Church of St Lawrence. For rail, the closest station is Hampton-In-Arden station, about 2.4 miles west. Further afield, we also cover the area around Allesley Castle (3.8 miles east) and Berkswell Village Museum (2 miles south).

Map of Meriden © OpenStreetMap contributors

When we would advise against a repair

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

Do you need non-slip bath coating in Meriden?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The most common problems we are called about are:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Before you book anyone

  • Whether a trained technician does the job
  • What protection goes down before work starts
  • What happens if they find more damage
  • How long it needs to cure

How to compare quotes

For landlords and businesses

We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.

For anyone letting property in or around Meriden, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Meriden

  • CHAS, Constructionline and SafeContractor accredited
  • A fixed quote before booking
  • No need to remove anything
  • Every repair guaranteed for a year

Read our prices page.

Prices and what affects them

You will know the full cost before booking. We look at:

  • Doing more than one item at once
  • The colour and finish to match
  • Any earlier repairs that need removing first
  • The material and finish

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Quotes from your pictures

You can generally get a fixed quote without us visiting. To make it quick:

  • Where you are, by postcode
  • Any earlier repairs or coatings
  • A wider photo showing the entire bath or shower tray
  • The material, if you know it

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Clear the area around the damage
  • Have somewhere for us to park nearby if possible
  • Tell us if there are stairs or a lift

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Get a fixed price

Advice

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Questions from Meriden

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Can you price it without visiting?

Nearly always. If pictures do not show enough, we will ask for another angle.

Which areas do you work in?

We work UK-wide, so Meriden is covered. Prices don’t change with location.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that is in the quote.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you work in Meriden?

Yes. We work across the UK and come to Meriden. Send photos and we will quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.