Glasgow · Scotland
Non-Slip Bath Coating for Lightburn homes
Clear non-slip coatings for baths and shower trays for homes and businesses in Lightburn and across Glasgow. Send photos for a free, fixed quote.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What we cannot put right
A repair isn’t right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Enamelled baths
- Acrylic baths
How we handle non-slip bath coating in Lightburn
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair wet room floors (ask us), resurfaced baths and shower trays, and the jobs we see most are a bath or tray that is slippery when wet and worn-out textured areas.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Lightburn (G32, G33, G31)
- Area hub
- Glasgow
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need non-slip bath coating in Lightburn
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
These are the problems we’re asked about most:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
Before booking anyone
- How to look after the finish
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- The length of the guarantee and what it covers
What happens on the day
We agree an arrival time beforehand. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
Getting a price
Most customers in Lightburn get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Places near Lightburn
What else we do in Lightburn
Repairing versus replacing in Lightburn
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We charge the same wherever you are, with no extra for Lightburn. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Straight answers about what a repair can do
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
See our prices page.
Lightburn and the surrounding area
Lightburn is about 3 miles north of Cambuslang, in Glasgow. Customers in Lightburn get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Lightburn is one of 183 towns and villages in Glasgow where we work.
We cover every part of G32, G33 and G31 and the streets around it. Whether you live on Glen Road, Glen Avenue and Strone Road or a nearby road, we can come to you. Other places close to Lightburn include Cranhill (1 mile north), Greenfield (1 mile south), Springboig (1 mile east), Budhill (1 mile south-east) and Shettleston (1 mile south). Within a short drive, we also cover Glasgow (4 miles west), Hillhead (5 miles west), Dowanhill (5 miles west), Woodlands (4 miles west), Woodside (4 miles west) and North Kelvinside (4 miles west).
Local landmarks in Lightburn
We visit homes around Glasgow, Eastbank Academy and St Andrew's Secondary School, among other places. For rail, the closest station is Carntyne station, about 0.5 miles south-west. A little further out are The Forge Shopping Centre (1.2 miles west) and Farme Castle (2.2 miles south-west). Green spaces nearby include Lenzie Moss and Hogganfield Loch.
Common questions in Lightburn
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
How much does non-slip bath coating cost in Lightburn?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What areas do you cover?
Across the UK, so Lightburn is covered. Prices don’t change with location.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Do you come to Lightburn?
Yes. We work across the UK and come to Lightburn. Send us photos for a fixed quote, or call 0345 017 0787.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
What affects the price in Lightburn
We do not charge extra for travel to Lightburn. The price comes down to:
- The colour and finish to match
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Any details about the material
- Good light, ideally daylight, without flash glare
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Glasgow and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Lightburn as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
