Warwickshire · England
Non-slip bath & shower coating in Lilbourne, Warwickshire
Clear non-slip coatings for baths and shower trays for homes and businesses in Lilbourne and across Warwickshire. Send pictures for a free, fixed quote.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Lilbourne
The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. We work on wet room floors (ask us), resurfaced baths and shower trays, and common reasons people contact us are a bath or tray that is slippery when wet and safety for older or less mobile people.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Lilbourne (CV23)
- County
- Warwickshire
- Cover
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Lilbourne
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What does non-slip bath coating cost?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your CV23 postcode.
What areas do you cover?
All of Warwickshire, and the rest of the UK. Travel is included in the price.
Will I see the coating?
Very little: it shows as a matt area where you stand.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work in Lilbourne?
Yes. We work across the UK and come to Lilbourne. Send pictures and we will quote, or call 0345 017 0787.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
The process
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Ensure the room can be ventilated
Getting a price
Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Lilbourne, and we’ll reply with a fixed quote.
Read more
Towns and villages near Lilbourne
What else we do in Lilbourne
Signs you need non-slip bath coating in Lilbourne
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Before booking anyone
- When it can be used again
- Whether they match the colour on site
- What happens if they find more damage
- Whether the price covers travel
How we price non-slip bath coating
You’ll know the full cost before booking. We take into account:
- Unusual colours or finishes
- Where the damage is and how we get to it
- What kind of damage it is
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Lilbourne as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Where we work around Lilbourne
Lilbourne is about 4 miles east of Rugby, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in 324 places in Warwickshire. We work right across the region, from Lilbourne to Birmingham (31 miles away).
Here we cover the CV23 postcode area. Local streets include Station Road, The Horsepool and Chapel Lane, and we cover them all. We also cover the places around Lilbourne: Catthorpe (1 mile north-west), Clay Coton (2 miles east), Houlton (2 miles south), Yelvertoft (2 miles south-east) and Barby Nortoft (3 miles south). We also work in nearby towns such as Rugby (4 miles west), Bedworth (14 miles north-west), Southam (13 miles south-west), Brownsover (3 miles west), Bilton (5 miles west) and Chilvers Coton (15 miles north-west).
Landmarks near Lilbourne
Typical jobs here are in homes near Church of All Saints and Head of Steam pub and the streets around them. Lilbourne’s nearest station is Rugby station, roughly 3.3 miles west of the centre. Further afield, we also cover the area around St Luke's Hospital (3.5 miles west) and Lilbourne Castle (under half a mile north). Not far away are Swift Valley Nature Reserve.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Lilbourne
- We leave the room as we found it
- No extra charge for your area
- Work done at your home or business
- CHAS and Constructionline accredited
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
