Warwickshire · England
Bath re-enamelling & resurfacing in Lilbourne, Warwickshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Lilbourne. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Bath re-enamelling in Lilbourne without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with an original cast iron bath that needs restoring and several chips and rust patches, we can help.
All of our repairs are guaranteed for twelve months in Lilbourne and everywhere else. We return to put right any problem with the work.
- Area
- Lilbourne (CV23)
- County
- Warwickshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- How hard the colour is to match
- How much damage there is
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A picture taken from further back
- Details of any past repairs
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
How it works
We agree an arrival time beforehand. On site, it takes a full day for most jobs. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Keep children and pets away from the room on the day
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Common problems we fix in Lilbourne
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Signs it’s time to call us include:
- A coloured bath you want in white
- Several chips and rust patches
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
Questions to ask before booking
- When it can be used again
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Whether a trained technician does the job
Where we work around Lilbourne
Lilbourne is about 4 miles east of Rugby, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 324 places across Warwickshire. Our nearest city page is Birmingham, about 31 miles away.
Here we cover the CV23 postcode area. We regularly work on streets such as Station Road, The Horsepool and Chapel Lane and the roads around them. We also cover the places around Lilbourne: Catthorpe (1 mile north-west), Clay Coton (2 miles east), Houlton (2 miles south), Yelvertoft (2 miles south-east) and Barby Nortoft (3 miles south). Further out, we also cover Rugby (4 miles west), Bedworth (14 miles north-west), Southam (13 miles south-west), Brownsover (3 miles west), Bilton (5 miles west) and Chilvers Coton (15 miles north-west).
Landmarks near Lilbourne
Typical jobs here are in homes near Church of All Saints and Head of Steam pub. The closest station to Lilbourne is Rugby station, roughly 3.3 miles west of the centre. Well-known places in the area include St Luke's Hospital (3.5 miles west) and Lilbourne Castle (under half a mile north). Not far away are Swift Valley Nature Reserve.
Repair or replace in Lilbourne?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Most jobs done in one visit
- A fixed quote before booking
- Every repair guaranteed for a year
- No need to remove anything
See our pricing or guide to resurfacing and replacement costs.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Nearby places to Lilbourne
More services for Lilbourne
FAQs for Lilbourne
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you cover Lilbourne?
We do. We send a technician to Lilbourne for every job, with no extra charge for travel.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.
