Norfolk · England

Non-Slip Bath Coating for Little Ryburgh homes

Non-slip bath coating in Little Ryburgh without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Little Ryburgh

Little Ryburgh and nearby

Little Ryburgh is about 10 miles north of Dereham, in Norfolk. Across the NR21 area, we carry out the work at your property. We cover all 797 towns and villages in Norfolk.

Every address in NR21 is within our area. Nearby, we also work in Great Ryburgh (1 mile south-west), Stibbard (1 mile east), Croxton (2 miles north-east), Kettlestone (2 miles north) and Fulmodeston (2 miles north-east). We also work in nearby towns such as Dereham (10 miles south), Sheringham (15 miles north-east), Swaffham (15 miles south-west), Taverham (15 miles south-east), Fakenham (3 miles north-west) and Aylsham (14 miles east).

Near you in Little Ryburgh

Our customers here include homes close to Church of All Saints and All Saints Church of England VA Primary School, among other places. Other landmarks nearby include Fakenham Museum of Gas and Local History (3.1 miles west). Green spaces nearby include Pensthorpe Nature Reserve and Beacon Hill.

Map of Little Ryburgh © OpenStreetMap contributors

How we handle non-slip bath coating in Little Ryburgh

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include worn-out textured areas and safety for older or less mobile people, across resurfaced baths, acrylic baths and enamelled baths.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Little Ryburgh (NR21)
Region
Norfolk
Warranty
A year, on every repair
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When we would advise against a repair

A repair is not always the answer, and we’ll tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we repair

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Shower trays

What affects the price in Little Ryburgh

We give every job a fixed price from pictures. This is what makes a difference:

  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • The material

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed quote

Two or three clear photos are generally enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size
  • Where you are, by postcode
  • Details of any past repairs

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You will get a fixed price, not an estimate.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Little Ryburgh

  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • Work done at your home or business

See our prices page.

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep pets and children out of the room while we work
  • Let us know if it has been repaired before

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Signs you need non-slip bath coating in Little Ryburgh

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • What aftercare is recommended
  • Whether they match the colour on site
  • How long the guarantee is and what it covers
  • Whether there are any call-out or travel charges

How to compare quotes

FAQs for Little Ryburgh

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Will I see the coating?

Very little: the treated area looks slightly matt.

Do you cover Little Ryburgh?

We do. Technicians travel to Little Ryburgh from across the region, and the price is the same as everywhere else.

Can I get a quote without a visit?

Generally, yes. Clear photos let us give you a fixed price without visiting.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Landlord and trade work in Little Ryburgh

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.