Powys · Wales

Non-slip bath & shower coating in Llyswen, Powys

Non-slip bath coating for Llyswen, without a refit. Send us pictures for a fixed price, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Llyswen

How we handle non-slip bath coating in Llyswen

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can usually put it right.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Llyswen (LD3)
Area hub
Powys
Warranty
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

How we price non-slip bath coating

We price every job individually, from your pictures. The main factors are:

  • How many items we do on one visit
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.

Quotes from your pictures

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Details of any past repairs
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Llyswen, and we will come back with a fixed quote.

When to call us in Llyswen

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

What to look for in a quote

  • What prep work is covered
  • How the colour is matched
  • Who turns up on the day
  • What the guarantee covers, and for how long

Choosing a repair company

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Questions from Llyswen

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Can you quote from photos?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Do the materials smell?

Expect a mild smell while we are working.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before and we’ll plan for it.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Where we work around Llyswen

Llyswen is about 17 miles north of Ebbw Vale, in Powys. Whether you’re in the middle of Llyswen or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 234 towns and villages in Powys, from the larger towns to small villages. We work right across the region, from Llyswen to Birmingham (65 miles away).

Every address in LD3 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Bochrwyd (1 mile north), Boughrood (1 mile north), Pont-y-wal (2 miles south), Bronllys (2 miles south) and Aberllynfi (2 miles east). Larger places within reach include Brecon (8 miles south-west), Llandrindod Wells (15 miles north), Llanfair-ym-Muallt (10 miles north-west), Llanfaes (8 miles south-west), Crughywel (13 miles south-east) and Talgarth (3 miles south-east).

Around Llyswen

In Llyswen, that means homes near Archdeacon Griffiths C.I.W. Primary School, St Gwendoline's Church and Griffin Inn and the streets around them. Well-known places in the area include Bridge End Inn Mound (under half a mile north-west) and Howell Harris Museum (3.6 miles south). The countryside around Llyswen includes Pwll Brechfa and Mintfield Hill.

Map of Llyswen © OpenStreetMap contributors

What we can’t put right

Before booking, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.

Why us?

  • Rooms protected and left tidy
  • One price list for the entire UK
  • Straight answers about what a repair can do
  • Fixed prices from your photos

Read our prices page.

What happens on the day

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Keep pets and children out of the room while we work
  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Related advice

Landlord and trade work in Llyswen

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.