Herefordshire · England
Non-slip bath & shower coating in Lucton, Herefordshire
Non-slip bath coating in and around Lucton: photo quotes, tidy work and a year’s guarantee.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Non-slip bath coating at your home in Lucton
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for safety for older or less mobile people and bath mats that harbour mould or get forgotten, in enamelled baths, wet room floors (ask us) and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Lucton (HR6)
- Region
- Herefordshire
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours. Before we go, we will explain when it can be used and how to care for it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
Places near Lucton
Other services in Lucton
Repair or replace in Lucton?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Lucton
- Work done at your home or business
- No need to remove anything
- Most jobs done in one visit
- CHAS and Constructionline accredited
Take a look at our pricing.
What non-slip bath coating costs
We do not charge extra for travel to Lucton. The price comes down to:
- Whether old repairs or coatings need taking off
- The material and finish
- Where the damage is and how we get to it
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Lucton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One picture of the entire bath or shower tray
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Signs you need non-slip bath coating in Lucton
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
These are the problems we are asked about most:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Before you book anyone
- What protection goes down before work starts
- Whether the price covers travel
- How changes to the job are handled
- How long the guarantee is and what it covers
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
FAQs for Lucton
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How much does non-slip bath coating cost in Lucton?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your HR6 postcode.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work in Lucton?
Yes, we do. We send a technician to Lucton for every job, and the price is the same as everywhere else.
Can you quote from photos?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Our work in Lucton
Lucton is about 16 miles north of Hereford, in Herefordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lucton is one of 255 towns and villages in Herefordshire we cover. You can also see our page for Birmingham, about 42 miles away.
Here we cover the HR6 postcode area. You’ll find streets such as Church Road, St Peter's Square and Lucton Lane, and we cover them all. Neighbouring places we cover include Aymestrey (1 mile north-west), Mortimer's Cross (1 mile south-west), Kingsland (2 miles south), Cobnash (2 miles south) and Shobdon (3 miles south-west). Within a short drive, we also cover Leominster (5 miles south-east), Whitecross (15 miles south), Widemarsh (15 miles south), Bromyard (14 miles south-east), Kington (10 miles south-west) and Aylestone Hill (15 miles south).
Around Lucton
In Lucton, that means homes near Mortimers' Cross Inn and Church of St John the Baptist and St Alkmund, among other places. Nearby you’ll also find Croft Castle (1.1 miles north-east). Green spaces nearby include Dionscourt Hill.
About our accreditations · Every repair comes with a one-year guarantee.
