Herefordshire · England

Non-Slip Bath Coating in Mortimer's Cross

Non-slip bath coating in Mortimer's Cross without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Mortimer's Cross?

Can I fix it myself?

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

How we handle non-slip bath coating in Mortimer's Cross

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with a bath or tray that is slippery when wet and safety for older or less mobile people, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Mortimer's Cross (HR6)
Area hub
Herefordshire
Warranty
A year, on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

When to call us in Mortimer's Cross

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

What to look for in a quote

  • If travel is included in the price
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • The length of the guarantee and what it covers

Our hiring checklist

What non-slip bath coating costs

There is no area surcharge for Mortimer's Cross. What changes the price is:

  • Any earlier repairs that need removing first
  • The size and number of damaged areas
  • How many items we do on one visit
  • The material

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Good pictures mean an accurate price. Here’s what we find most useful:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.

Our work in Mortimer's Cross

Mortimer's Cross is about 15 miles north of Hereford, in Herefordshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Mortimer's Cross is one of 255 towns and villages in Herefordshire where we work. Our nearest city page is Birmingham, about 43 miles away.

Our technicians cover all of HR6 and the streets around it. Neighbouring places we cover include Lucton (1 mile north-east), Aymestrey (1 mile north), Kingsland (2 miles south-east), Shobdon (2 miles south-west) and Cobnash (2 miles south-east). We also work in nearby towns such as Hereford (15 miles south), Leominster (5 miles south-east), Whitecross (15 miles south), Widemarsh (15 miles south), Bromyard (15 miles east) and Kington (9 miles south-west).

Near you in Mortimer's Cross

Locally, our jobs take us to homes close to Mortimers' Cross Inn and Church of St John the Baptist and St Alkmund and the streets around them. Well-known places in the area include Shobdon 2 (1.1 miles west). For a walk, there is Dionscourt Hill.

Map of Mortimer's Cross © OpenStreetMap contributors

The process

We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Clear the area around the damage
  • Let us know if it has been repaired before
  • Let the surface dry out before the visit

How to get a price

Most clients in Mortimer's Cross get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

What we cannot put right

Before booking, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Housing associations and facilities teams use us for planned and reactive repairs in Herefordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Your questions about non-slip bath coating in Mortimer's Cross

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

How much does non-slip bath coating cost in Mortimer's Cross?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Repair or replace in Mortimer's Cross?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why choose Surface Doctor in Mortimer's Cross

  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • Same prices wherever you are

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.