Angus · Scotland

Non-slip bath & shower coating in Lunanhead, Angus

Non-slip bath coating in and around Lunanhead: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Lunanhead

Non-slip bath coating in Lunanhead without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We regularly repair resurfaced baths, wet room floors (ask us) and shower trays, and people most often call us about worn-out textured areas and a bath or tray that is slippery when wet.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Lunanhead (DD8)
Area hub
Angus
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

When we’d advise against a repair

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)

Repairing versus replacing in Lunanhead

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Everything repaired in place
  • Most jobs done in one visit
  • Technicians who travel to you, UK-wide
  • One-year guarantee on every repair

Take a look at our full price list.

FAQs for Lunanhead

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Angus.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

How much does non-slip bath coating cost in Lunanhead?

Because every job differs, we price from photos. You will get a fixed figure before booking.

How we price non-slip bath coating

We price every job individually. What matters most is:

  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • What the surface is made of
  • Whether we combine several jobs

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • One picture of the entire bath or shower tray

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

What we do, step by step

Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work
  • Have a window or extractor fan available

Ask for a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Read more

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Lunanhead and the surrounding area

Lunanhead is about 1 mile north-east of Forfar, in Angus. Our technicians come to clients in Lunanhead and nearby villages, so there’s no workshop to go to. Our technicians cover all 40 towns and villages across Angus. Our jobs stretch from Lunanhead to Edinburgh (about 51 miles away).

We cover every part of DD8 and the streets around it. Whether you live on Carseview Terrace, Muirlands Court and Old Brechin Road or anywhere nearby, we can come to you. Nearby, we also work in Forfar (1 mile south-west), Kingsmuir (2 miles south), Lownie Moor (2 miles south), Hillend (2 miles south) and Padanaram (3 miles west). Within a short drive, we also cover Arbroath (12 miles south-east), Carnoustie (12 miles south-east), Kirriemuir (6 miles west), Brechin (9 miles north-east), Hunter's Town (12 miles south-east) and Gardynebourg (12 miles south-east).

Around Lunanhead

Our clients here include homes close to Forfar Academy, Lowson Memorial Church and Guthrie Park. A little further out are Forfar Castle (1.5 miles south-west) and Meffan Museum and Art Gallery (1.5 miles south-west). For a walk, there is Loch Fithie.

Map of Lunanhead © OpenStreetMap contributors

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Angus and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Common problems we fix in Lunanhead

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things customers typically mention when they call include:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Comparing quotes

  • How long it needs to cure
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.