Middlesbrough · England

Non-slip bath & shower coating in Maltby, Middlesbrough

Non-slip bath coating for Maltby, without a refit. Send us photos for a fixed price, then book a visit.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Maltby

About our non-slip bath coating in Maltby

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can typically put it right, whatever the material.

Big or small, it’s backed by a one-year guarantee in Maltby and across Middlesbrough. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Maltby (TS8)
Region
Middlesbrough
Warranty
A year, on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Every repair guaranteed for a year
  • Typically one visit, start to finish
  • Straight answers about what a repair can do
  • No extra charge for your area

Take a look at our prices page.

Common questions in Maltby

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you cover the whole of Middlesbrough?

All of Middlesbrough, and the rest of the UK. Travel is included in the price.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

How do I get a price for non-slip bath coating in Maltby?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Can you price it without visiting?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Our work in Maltby

Maltby is about 1 mile east of Ingleby Barwick, in Middlesbrough. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Maltby is one of 33 towns and villages in Middlesbrough we cover. Our jobs stretch from Maltby to Newcastle upon Tyne (36 miles away).

Our visits in TS8 work the same way as everywhere else we cover. Whether you live on High Lane, Roger Lane and Pennyman Green or anywhere nearby, a technician can come to you. We also cover the places around Maltby: Thornton (1 mile east), Stainton (1 mile north-east), Brookfield (2 miles north-east), Hemlington (2 miles north-east) and Thornaby-on-Tees (2 miles north). We also work in nearby towns such as Middlesbrough (4 miles north-east), Park End (4 miles north-east), Berwick Hills (4 miles north-east), Whale Hill (7 miles north-east), Normanby (6 miles north-east) and Marton Grove (4 miles north-east).

Landmarks near Maltby

In Maltby, that means homes near The Stainton Public House, Ingleby Manor Free School & Sixth Form and Church of St. Peter and St. Paul, among other places. The nearest railway station is Eaglescliffe station, about 3 miles west. Further afield, we also cover the area around Carter Bequest Primary Care Hospital (3.1 miles north-east) and Yarm Castle (3 miles west).

Map of Maltby © OpenStreetMap contributors

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Make sure the area is dry
  • Tell us if there are stairs or a lift

How to get a price

If you are in Maltby and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

Landlords, agents and businesses in Maltby

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs in Middlesbrough and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

When a repair isn’t the answer

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Do you need non-slip bath coating in Maltby?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What to look for in a quote

  • How the colour is matched
  • If travel is included in the price
  • What prep work is covered
  • Whether a trained technician does the job

Choosing a repair company

How we price non-slip bath coating

A fixed quote means you know the cost before booking. We look at:

  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • How many items we do on one visit
  • What kind of damage it is

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Send pictures for a quote

It only takes a minute to photograph the damage. Try to send:

  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • A picture taken from further back
  • A clear, close picture of the problem area

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.