Worcestershire · England
Non-slip bath & shower coating in Marlbrook, Worcestershire
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Marlbrook. Send pictures for a free, fixed quote.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people

Repair or replace in Marlbrook?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Marlbrook
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Typically one visit, start to finish
Take a look at our prices page.
Non-slip bath coating in Marlbrook without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with resurfaced baths that are now too smooth and worn-out textured areas, we can generally put it right, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

- Area
- Marlbrook (B61, B60)
- Area hub
- Worcestershire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Marlbrook
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover Marlbrook?
Yes. We cover the entire UK and come to Marlbrook. Send us photos for a fixed quote, or call 0345 017 0787.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Worcestershire.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Nearby places to Marlbrook
What else we do in Marlbrook
Common problems we fix in Marlbrook
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed any of these:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Questions to ask before you book
- How long the guarantee is and what it covers
- What happens if they find more damage
- Whether there are any call-out or travel charges
- What aftercare is recommended
Landlord and trade work in Marlbrook
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Marlbrook and the surrounding area
Marlbrook is about 2 miles north of Bromsgrove, in Worcestershire. Anywhere in B61, a technician comes to you. Our repair technicians cover all 376 towns and villages across Worcestershire. Our jobs stretch from Marlbrook to Birmingham (about 10 miles away).
Our visits in B61 and B60 work the same way as everywhere else we cover. Jobs here include addresses on Oak Road, Acorn Road and Braces Lane and the roads around them. If you are just outside Marlbrook, we cover Upper Marlbrook (1 mile north-east), Lower Marlbrook (1 mile north), Catshill (1 mile west), Lickey End (1 mile south) and Lydiate Ash (1 mile north). Within a short drive, we also cover Worcester (14 miles south-west), Redditch (6 miles south-east), Kidderminster (9 miles west), Droitwich Spa (9 miles south-west), Stourport-on-Severn (10 miles west) and Bewdley (12 miles west).
Local landmarks in Marlbrook
Around Marlbrook, we work in homes near Catshill First School, Lickey Hills Country Park and North Bromsgrove High School. Nearby too are Miller & Carter pub (within half a mile north-west) and St Luke (within half a mile north-west). For rail, the closest station is Barnt Green station, about 2 miles east of the centre. Nearby you’ll also find Castlebourne folly (2.6 miles north-west) and Norton Collection Museum (1.8 miles south). For a walk, there’s Chaddesley Woods National Nature Reserve and Bilberry Hill.
The process
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a few hours, and we’ll tell you if anything changes.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Get a quote
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
What a repair can’t fix
A repair is not right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Enamelled baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
Prices and what affects them
Prices are worked out job by job. The main factors are:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How many areas need work
- The type of damage
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Something in shot to show the size
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
If you’re in Marlbrook and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.

