Neath Port Talbot · Wales

Non-slip bath & shower coating in Melincourt, Neath Port Talbot

Clear non-slip coatings for baths and shower trays for homes and businesses in Melincourt and across Neath Port Talbot. Send pictures for a free, fixed quote.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Melincourt

About our non-slip bath coating in Melincourt

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on enamelled baths, wet room floors (ask us) and acrylic baths, and people most frequently call us about resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.

All our work is covered by our one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Melincourt (SA11)
Region
Neath Port Talbot
Cover
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

What non-slip bath coating costs

Every quote is fixed and free. What we look at:

  • How many areas need work
  • The colour and finish to match
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Getting a price from photos

Photographing the damage takes a minute. Please include:

  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • A close-up of the damage, in focus

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Landlord and trade work in Melincourt

We work for landlords, letting agents and housing providers in Melincourt as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why choose Surface Doctor in Melincourt

  • Every repair guaranteed for a year
  • Work done at your home or business
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing.

Where we work around Melincourt

Melincourt is about 5 miles north-east of Neath, in Neath Port Talbot. We visit homes and businesses in Melincourt, so nothing has to leave your home. Melincourt is one of 100 places in Neath Port Talbot where we work.

Every address in SA11 is covered. You will find streets such as Lletty Dafydd, Llys Dwfnant and Hill Street, and we cover them all. Other places close to Melincourt include Melin-cwrt (1 mile north-east), Abergarwed (1 mile north), Resolven (1 mile north-east), Creunant (2 miles north-west) and Tre-Forgan (3 miles north-west). Further out, we also cover Neath (5 miles south-west), Port Talbot (8 miles south-west), Sandfields (8 miles south-west), Mount Pleasant (5 miles south-west), Baglan Moors (8 miles south-west) and Sandfields West (8 miles south-west).

Around Melincourt

Typical jobs here are in homes near Ynysfach Primary School. The closest station to Melincourt is Neath station, about 4.7 miles south-west. Further afield, we also cover the area around Tonna Hospital (2.6 miles south-west) and Gnoll House (4.3 miles south-west). Green spaces nearby include Mynydd Blaenafon and Gnoll Estate Country Park lake 1.

  • Other local spots include Neath Lower (1 mile west)
Map of Melincourt © OpenStreetMap contributors

What we do, step by step

Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon. Before we go, we will explain when it can be used and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area
  • Have a window or extractor fan available

Ask for a price

If you are in Melincourt and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Related advice

What we’re called out for in Melincourt

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people get in touch when they notice something like this:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • Whether the colour is mixed to match
  • What aftercare is recommended
  • Whether a trained technician does the job
  • What protection goes down before work starts

Choosing a repair company

Melincourt: your questions answered

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Are there extra charges for Melincourt?

No. Our quotes include travel, and we charge the same wherever you are.

How do I get a price for non-slip bath coating in Melincourt?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Melincourt.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.