Devon · England

Non-slip bath & shower coating in Metcombe, Devon

Clear non-slip coatings for baths and shower trays in Metcombe, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Metcombe

Questions from Metcombe

Will you travel to Metcombe?

Yes. We cover villages and hamlets as well as towns. Let us know about access and parking.

Is it worth repairing old baths and shower trays in a period home in Metcombe?

In most cases: original pieces are often better made and harder to replace. We’ll give you an honest view from pictures.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

How much does non-slip bath coating cost in Metcombe?

Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Will I see the coating?

Very little: the treated area looks slightly matt.

How we handle non-slip bath coating in Metcombe

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for safety for older or less mobile people and a bath or tray that is slippery when wet, in shower trays, enamelled baths and resurfaced baths.

Rural addresses like Metcombe just need a little planning. Let us know about access and where to park, and we will take care of the rest.

All our work comes with our one-year guarantee, wherever you are in Devon. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Metcombe (EX11)
Area hub
Devon
Warranty
One year on every repair
Price
Fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026

What non-slip bath coating costs

Quotes cost nothing and the price is fixed. What we take into account:

  • The material and finish
  • How many areas need work
  • Doing more than one item at once
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

Before you send pictures, a few simple things make all the difference:

  • Where you are, by postcode
  • A wider photo showing the whole bath or shower tray
  • One sharp close-up of the damage
  • Something in shot to show the size

Email us pictures of the damage and a wider shot of the whole item, with your EX11 postcode, and we’ll reply with a fixed price.

What we do, step by step

Nothing needs to be moved out of the room. We bring all our kit in the van, put protection down and get going once we’ve agreed what we are doing. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work. For a rural address like Metcombe, we plan the journey in advance: tell us about narrow lanes, gates, long drives or where to park. Everything for the non-slip bath coating comes with us in one trip.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Make sure the room can be ventilated
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.

Get a quote

Advice

For landlords and businesses

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.

We work for landlords, letting agents and housing providers in Metcombe as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Baths in Metcombe homes

In the older streets of Metcombe, around landmarks like Church of St John, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.

Metcombe is about 3 miles north-west of Sidmouth, in Devon. Jobs in Metcombe are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 586 places across Devon.

Our technicians cover all of EX11 for non-slip bath coating and the streets around it. That includes homes on Tipton Vale and Metcombe Rise. If you are just outside Metcombe, we cover Tipton St John (1 mile south-east), Harpford (1 mile south), Wiggaton (1 mile north-east), Bowd (2 miles south-east) and Stowford (2 miles south-east). Further out, we also cover Exeter (10 miles west), Exmouth (8 miles south-west), Tiverton (15 miles north-west), Teignmouth (15 miles south-west), Sidmouth (3 miles south-east) and Honiton (7 miles north-east).

Landmarks near Metcombe

Typical jobs here are in homes near Dawlish Community College and The Golden Lion Inn, among other places. Metcombe’s nearest station is Whimple station, roughly 4.2 miles north-west of the centre. Other landmarks nearby include Ottery Heritage Museum (2.3 miles north) and Sidmouth Hospital (3.6 miles south-east). Green spaces nearby include Peak Hill and Aylesbeare Common RSPB reserve.

Map of Metcombe © OpenStreetMap contributors

Repair or replace in Metcombe?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. For a rural home like those around Metcombe, a replacement means trades travelling out and waste being taken away, while non-slip bath coating is one trip.

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Metcombe clients choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • A year’s guarantee on all work
  • A fixed quote before you book
  • Work done at your home or business

Take a look at our Full price list.

Honest limits

A repair is not right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Enamelled baths

When to call us in Metcombe

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers typically contact us about:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Landlords with property near Whimple station (about 4.2 miles north-west) use us between tenancies, so baths and shower trays are repaired rather than replaced.

What your quote should include

  • Who turns up on the day
  • Whether there are any call-out or travel charges
  • Is the price fixed, and does it include VAT?
  • What prep work is covered

How to compare quotes

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.