Lancashire · England

Non-Slip Bath Coating for Mewith Head homes

We travel to Mewith Head for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Mewith Head homes

About our non-slip bath coating in Mewith Head

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Our repair technicians work on shower trays, enamelled baths and acrylic baths, and common reasons people get in touch are safety for older or less mobile people and bath mats that harbour mould or get forgotten.

A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Mewith Head (LA2)
Area hub
Lancashire
Guarantee
A year, on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Honest limits

We will not take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)

Common questions in Mewith Head

How do I get a price for non-slip bath coating in Mewith Head?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

Can you quote from photos?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Do you come to Mewith Head?

We do. Technicians travel to Mewith Head from across the region, with no extra charge for travel.

Do you work for landlords and businesses?

Yes, frequently. We can quote for several properties together and work between tenancies.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Can you repair something that is been repaired before?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Our work in Mewith Head

Mewith Head is about 14 miles east of Lancaster, in Lancashire. Across the LA2 area, a technician comes to you. Mewith Head is one of 482 places in Lancashire where we work. We work right across the region, from Mewith Head to Leeds (42 miles away).

Our visits in LA2 work the same way as everywhere else we cover. Close by, we cover Keasden (1 mile east), Newby (2 miles north-east), High Bentham (3 miles north-west), Cold Cotes (3 miles north) and Clapham (3 miles north-east). Within a short drive, we also cover Lancaster (14 miles west), Westfield War Memorial Village (15 miles west), Carnforth (13 miles west), Bare (15 miles west), Bolton-le-Sands (14 miles west) and Torrisholme (15 miles west).

Landmarks near Mewith Head

For rail, the closest station is Clapham (North Yorkshire) station, roughly 1.9 miles east of the centre. Open spaces near Mewith Head include Constitutional.

Map of Mewith Head © OpenStreetMap contributors

What we are called out for in Mewith Head

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

People generally call us when they notice something like this:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • How the colour is matched
  • What happens if they find more damage
  • What prep work is covered
  • What protection goes down before work starts

Choosing a repair company

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • We leave the room as we found it
  • Fixed prices from your pictures
  • CHAS, Constructionline and SafeContractor accredited
  • A year’s guarantee on all work

Read our pricing.

How the visit works

Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit

Get a quote

The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Get a fixed quote

Advice

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Landlords, agents and businesses in Mewith Head

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

What non-slip bath coating costs

Each job gets its own fixed price. These are the things that affect it:

  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • The colour and finish to match

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

You can normally get a fixed price without us visiting. To help us price it:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • A wider photo showing the entire bath or shower tray

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job without visiting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.