Hampshire · England
Non-Slip Bath Coating for Micheldever Station homes
Non-slip bath coating for Micheldever Station, without a refit. Send us photos for a fixed price, then we come to you.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
About our non-slip bath coating in Micheldever Station
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We regularly repair wet room floors (ask us), acrylic baths and resurfaced baths, and common reasons people contact us are resurfaced baths that are now too smooth and worn-out textured areas.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Micheldever Station (SO21)
- Area hub
- Hampshire
- Warranty
- A year, on every repair
- Price
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
Some jobs aren’t right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we work on in Micheldever Station
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
When to call us in Micheldever Station
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Most people get in touch when they notice something like this:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What to look for in a quote
- How the room is protected while they work
- When it can be used again
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
How we price non-slip bath coating
You won’t pay by the hour. The price depends on:
- What kind of damage it is
- Doing more than one item at once
- How easy the damage is to reach
- Unusual colours or finishes
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Natural light rather than flash
- The material, if you know it
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Micheldever Station questions
What areas do you cover?
All of Hampshire, and the rest of the UK. Travel is included in the price.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Places near Micheldever Station
More services for Micheldever Station
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Let the surface dry out before the visit
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
For landlords and businesses
We work for landlords, letting agents and housing providers in Micheldever Station as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- We come to you, anywhere in the UK
- We leave the room as we found it
- Nothing taken out or refitted
- A fixed quote before you book
Read our full price list.
About Micheldever Station
Micheldever Station is about 8 miles north of Hyde, in Hampshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 55 miles away.
Every address in SO21 is within our area, from the main roads to the quietest streets. Whether you live on Andover Road, Overton Road and Ellis Drive or a nearby road, we can come to you. Neighbouring places we cover include Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Further out, we also cover Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Near you in Micheldever Station
In Micheldever Station, that means homes near The Dove Inn and the streets around them. The nearest railway station is Overton station, roughly 5 miles north.
About our accreditations · Every repair comes with a one-year guarantee.
