Hampshire · England
Bath Re-enamelling for Micheldever Station homes
We travel to Micheldever Station for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Several chips and rust patches
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How much damage there is
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Any details about the material
For a price in Micheldever Station, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling in Micheldever Station without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can typically put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee in Micheldever Station and across Hampshire.
- Where
- Micheldever Station (SO21)
- County
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Your questions about bath re-enamelling in Micheldever Station
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your SO21 postcode.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Which areas do you work in?
Everywhere in the UK, Micheldever Station included. Travel is included in the price.
How to care for the repair
Simple care helps the repair last. We recommend:
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Repairing versus replacing in Micheldever Station
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Take a look at our pricing or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Micheldever Station
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers typically mention when they call are:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Aftercare advice
- Whether the price is fixed and includes VAT
- How changes to the job are handled
Micheldever Station and the surrounding area
Micheldever Station is about 8 miles north of Hyde, in Hampshire. Whether you are in the middle of Micheldever Station or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Micheldever Station is one of 683 towns and villages in Hampshire we cover. We work right across the region, from Micheldever Station to London (55 miles away).
Our visits in SO21 work the same way as everywhere else we cover. Whether you live on Andover Road, Overton Road and Ellis Drive or a nearby road, a technician can come to you. We also cover the places around Micheldever Station: Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Further out, we also cover Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Around Micheldever Station
In Micheldever Station, that means homes near The Dove Inn, among other places. The nearest railway station is Overton station, about 5 miles north of the centre.
Also near Micheldever Station
What else we do in Micheldever Station
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
