Hampshire · England
Bath Repair in Micheldever Station
Chip and crack repairs to enamel, acrylic and cast iron baths in Micheldever Station, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
How we handle bath repair in Micheldever Station
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about damage beneath the taps and damage done while the bathroom was being fitted.
Every repair comes with a one-year guarantee.
- Where
- Micheldever Station (SO21)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Covering Micheldever Station
Micheldever Station is about 8 miles north of Hyde, in Hampshire. From the centre of Micheldever Station to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Micheldever Station to London (about 55 miles away).
Postcode districts we cover here: SO21. Whether you live on Andover Road, Overton Road and Ellis Drive or a nearby road, a technician can come to you. If you are just outside Micheldever Station, we cover Northbrook (2 miles south), Micheldever (2 miles south), East Stratton (3 miles south-east), Hunton (3 miles south-west) and Stoke Charity (3 miles south-west). Larger places within reach include Basingstoke (9 miles north-east), Winchester (9 miles south), Eastleigh (15 miles south), Andover (10 miles west), Chandler's Ford (15 miles south) and Alton (13 miles east).
Local landmarks in Micheldever Station
Around Micheldever Station, we work in homes near The Dove Inn, among other places. Micheldever Station’s nearest station is Overton station, roughly 5 miles north of the centre.
Signs you need bath repair in Micheldever Station
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- Chips under the taps
- Scratches you can feel with a fingernail
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Comparing quotes
- What prep work is covered
- A fixed quote, and whether VAT is included
- How soon you can use it again
- What protection goes down before work starts
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Repair or replace in Micheldever Station?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Usually one visit, start to finish
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- One price list for the entire UK
See our pricing or resurfacing vs replacement cost guide.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Clear the area around the damage
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
Getting a price
If you’re in Micheldever Station and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Nearby places to Micheldever Station
What else we do in Micheldever Station
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
FAQs for Micheldever Station
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Do you come to Micheldever Station?
Yes, we do. Repair technicians travel to Micheldever Station from across the region, and the price is the same as everywhere else.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
How much does bath repair cost in Micheldever Station?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
About our accreditations · Every repair comes with a one-year guarantee.
