West Lothian · Scotland

Non-Slip Bath Coating for Mid Calder homes

We travel to Mid Calder for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Mid Calder

For landlords and businesses

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

Landlords, letting agents and housing providers in Mid Calder use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Non-slip bath coating in Mid Calder without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on shower trays, enamelled baths and resurfaced baths, and the jobs we see most are a bath or tray that is slippery when wet and safety for older or less mobile people.

Big or small, you get the same one-year guarantee in Mid Calder and across West Lothian. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Mid Calder (EH53, EH54)
Region
West Lothian
Warranty
12 months on all our work
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

When we would advise against a repair

Before booking, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before you book.

Materials we work on in Mid Calder

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

The process

We work cleanly and quietly. We protect the area first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can
  • Keep pets and children out of the room while we work

Get a quote

Upload pictures of the damage and one of the entire item, with your EH53 postcode, and we will reply with a fixed quote.

Get a fixed price

Related advice

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • The material and finish
  • How easy the damage is to reach
  • The size and number of damaged areas
  • What kind of damage it is

We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Good photos mean an accurate price. Here’s what helps:

  • One picture of the entire bath or shower tray
  • A clear, close picture of the problem area
  • Details of any past repairs
  • Where you are, by postcode

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Do you need non-slip bath coating in Mid Calder?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a picture if you notice any of these:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • What aftercare is recommended
  • Whether the price covers travel
  • How long it needs to cure
  • Whether cleaning and preparation are in the price

Choosing a repair company

Common questions in Mid Calder

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across West Lothian.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Are there extra charges for Mid Calder?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is there any odour?

Expect a mild smell while we’re working, which fades afterwards.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job
  • Every repair guaranteed for a year
  • Nothing taken out or refitted

Read our pricing.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Where we work around Mid Calder

Mid Calder is about 1 mile south-west of East Calder, in West Lothian. Anywhere in EH53, we come to you. We work in all 58 towns and villages across West Lothian, from the larger towns to small villages. Our jobs stretch from Mid Calder to Edinburgh (about 11 miles away).

We cover every part of EH53 and EH54. You’ll find streets such as Main Street, Avenue Park and School Lane. Close by, we cover Oakbank (1 mile south-east), East Calder (1 mile north-east), Pumpherston (1 mile north-west), Livingston (1 mile west) and Calderwood (1 mile north-east). We also work in nearby towns such as Bathgate (6 miles west), Linlithgow (8 miles north-west), Whitburn (8 miles west), Broxburn (3 miles north), Armadale (9 miles west) and Winchburgh (5 miles north).

What’s near Mid Calder

In Mid Calder, that means homes near Mid Calder Parish Church, Black Bull Inn and East Calder Parish Church and the streets around them. For rail, the closest station is Livingston South station, roughly 1.6 miles south-west of the centre. A little further out are St John's Hospital (1.6 miles west) and The Centre (1.4 miles south-west). Not far away are Dechmont Law.

Map of Mid Calder © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.