Leeds · England
Non-Slip Bath Coating in Miles Hill
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Miles Hill. Send photos for a free, fixed quote.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Non-slip bath coating at your home in Miles Hill
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We work on acrylic baths, wet room floors (ask us) and resurfaced baths, and people most frequently call us about a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Miles Hill (LS7, LS6, LS17)
- Area hub
- Leeds
- Cover
- A year, on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
You won’t pay by the hour. The price is based on:
- Unusual colours or finishes
- How easy the damage is to reach
- How many areas need work
- How many items we do on one visit
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- The material, if you know it
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.
What we cannot put right
We would rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Miles Hill
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Your questions about non-slip bath coating in Miles Hill
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What do you need from me?
Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we will agree a date.
Do you need non-slip bath coating in Miles Hill?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
People typically call us after spotting one of these:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
What to look for in a quote
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the pictures show
- Aftercare advice
- How soon you can use it again
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Covering Miles Hill
Miles Hill is about 1 mile north of Leeds, in Leeds. Whether you’re in the middle of Miles Hill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 198 places in Leeds.
Our technicians cover all of the LS7, LS6 and LS17 postcode area. Local streets include Wood Lane, Well Lane and School Lane. We also cover the places around Miles Hill: Beckhill (1 mile north-west), Scott Hall (1 mile south-east), Meanwood (1 mile north-west), Chapel Allerton (1 mile north-east) and Potternewton (1 mile south-east). Larger places within reach include Morley (6 miles south), Pudsey (5 miles west), Rothwell (6 miles south-east), Beeston (4 miles south), Farsley (5 miles west) and Horsforth (4 miles west).
Near you in Miles Hill
Our clients here include homes close to Carr Manor Community School, Brudenell School and Church of St Matthew and the streets around them. Other local landmarks include Mill Field Primary School (within half a mile south), Beck and Call pub (within half a mile north), Chapel Allerton Park (0.7 miles north-east) and University of Leeds Libraries (1.3 miles south). The nearest railway station is Burley Park station, roughly 1.6 miles south-west. Further afield, we also cover the area around Yorkshire Cricket Museum (1.5 miles south-west) and Chapel Allerton Hospital (0.9 miles east). The countryside around Miles Hill includes Post Hill and Rodley Nature Reserve.
The process
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take a few hours.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Let us know about parking or access
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Miles Hill
- Normally one visit, start to finish
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
See our prices page.
Towns and villages near Miles Hill
More services for Miles Hill
About our accreditations · Every repair comes with a one-year guarantee.
