Perth and Kinross · Scotland

Non-slip bath & shower coating in Milnathort, Perth and Kinross

Clear non-slip coatings for baths and shower trays in Milnathort, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Milnathort

Non-slip bath coating in Milnathort, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s worn-out textured areas and resurfaced baths that are now too smooth, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Location
Milnathort (KY13)
Area hub
Perth and Kinross
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

What we are called out for in Milnathort

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

What to look for in a quote

  • What happens if they find more damage
  • What prep work is covered
  • Whether a trained technician does the job
  • Whether there are any call-out or travel charges

10 questions to ask before booking

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we’re done and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a free quote

Advice

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

About Milnathort

Milnathort is about 10 miles west of Glenrothes, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 107 towns and villages across Perth and Kinross. Our nearest city page is Edinburgh, about 21 miles away.

Here we cover the KY13 postcode area. You’ll find streets such as Wester Loan, Croft Wynd and Bowling Green Avenue, and we cover them all. We also travel to Kinross (1 mile south), Balado (2 miles south-west), Wester Balgedie (3 miles east), Glenlomond (3 miles east) and Duncrievie (3 miles north). Larger places within reach include Perth (12 miles north), Auchterarder (12 miles north-west), Letham (12 miles north), Scone (13 miles north), Tulloch (13 miles north) and Oakbank (11 miles north).

Near you in Milnathort

We visit homes around Parish Church and Churchyard and Kinross High School, among other places. Further afield, we also cover the area around Loch Leven Castle (2.1 miles south-east) and Michael Bruce Cottage Museum (3.6 miles east). Open spaces near Milnathort include Loch Leven and Loch Leven National Nature Reserve.

Map of Milnathort © OpenStreetMap contributors

Honest limits

A repair isn’t right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths

Prices and what affects them

A fixed quote means you know the cost before booking. We take into account:

  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • The material
  • What kind of damage it is

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

Phone pictures are fine, there is no need for anything special. Just make sure we can see:

  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • One sharp close-up of the damage
  • One picture of the entire bath or shower tray

To get a price, send two or three pictures using our quote form or call us. We’ll say immediately whether it can be repaired.

Questions from Milnathort

Will there be a smell?

Expect a mild smell while we are working.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Can you price it without visiting?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Repair or replace in Milnathort?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • Same prices wherever you are
  • Everything repaired in place
  • Every repair guaranteed for a year
  • Honest advice, even when it means no job

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.