Perth and Kinross · Scotland
Non-Slip Bath Coating for Perth homes
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Perth. Free, fixed quotes from your pictures.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
Non-slip bath coating in Perth, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We regularly repair wet room floors (ask us), shower trays and enamelled baths, and the jobs we see most are worn-out textured areas and bath mats that harbour mould or get forgotten.
Big or small, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Perth (PH1, PH2)
- Area hub
- Perth and Kinross
- Cover
- A year, on every repair
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Perth
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Before booking anyone
- Whether cleaning and preparation are in the price
- When it can be used again
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Landlords, agents and businesses in Perth
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Towns and villages near Perth
What else we do in Perth
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Resurfaced baths
- Shower trays
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
How the visit works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. The room is left tidy.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Keep a parking space free if you can
- Have a window or extractor fan available
- Ensure the area is dry
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Advice
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Most jobs done in one visit
Take a look at our pricing.
What affects the price in Perth
There’s no area surcharge for Perth. The price reflects:
- How easy the damage is to reach
- The material and finish
- The colour and finish to match
- Whether we combine several jobs
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- A picture taken from further back
- What it’s made of, if you know
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Your questions about non-slip bath coating in Perth
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Will I see the coating?
Very little: it shows as a matt area where you stand.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Perth and Kinross.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Perth and the surrounding area
Perth is about 33 miles north of Edinburgh, in Perth and Kinross. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 107 places across Perth and Kinross, from the larger towns to small villages. Our nearest city page is Edinburgh, about 33 miles away.
Postcode districts we cover here: PH1 and PH2. Streets in the area include Simpson Square, High Street and Moredun Square, and we cover them all. Main roads around Perth include the A9 and A85, so getting to you is simple. Other places close to Perth include Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). Further out, we also cover Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). As one of the bigger places in Perth and Kinross, Perth sees plenty of our work.
Landmarks near Perth
Around Perth, we work in homes near Milne Street, St John's Academy and Perth High School, among other places. Also close by are Public House (0.6 miles east) and North Inch (0.8 miles east). For rail, the closest station is Perth station, roughly 0.7 miles south-east. Further afield, we also cover the area around Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). Green spaces nearby include St Magdalene's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
