Pembrokeshire · Wales

Non-slip bath & shower coating in Milton, Pembrokeshire

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Milton. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Milton

Non-slip bath coating in Milton without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and bath mats that harbour mould or get forgotten, across shower trays, resurfaced baths and enamelled baths.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Location
Milton (SA70)
Region
Pembrokeshire
Guarantee
One year on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Landlord and trade work in Milton

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Ensure the area is dry
  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible

Getting a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed price

Related advice

When we would advise against a repair

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)

Our work in Milton

Milton is about 8 miles east of Milford Haven, in Pembrokeshire. We travel to homes and businesses in Milton and nearby villages, so there is no workshop to go to. Milton is one of 223 places in Pembrokeshire where we work.

Here we cover the SA70 postcode area. That includes homes on Paskeston Road and Milton Meadows and the roads around them. Close by, we cover Carew (1 mile north-east), Caeriw (1 mile north-east), Sageston (1 mile east), Mayeston (2 miles west) and Manorbier Newton (2 miles south). We also work in nearby towns such as Haverfordwest (9 miles north-west), Milford Haven (8 miles west), Pembroke (3 miles west), Pembroke Dock (4 miles west), The Marsh (9 miles north-west) and Dinbych-y-Pysgod (6 miles east).

Near you in Milton

In Milton, that means homes near St Mary's Church, Milton Brewery Inn and Sageston C.P. School, among other places. Milton’s nearest station is Lamphey station, roughly 2.3 miles south-west. Nearby you’ll also find South Pembrokeshire Hospital (5 miles west) and Carew Castle (0.5 miles north-east). For a walk, there’s Mayeston Hill and Pembroke River upper.

Map of Milton © OpenStreetMap contributors

Prices and what affects them

Prices are worked out job by job, from your pictures. The main factors are:

  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • What the surface is made of
  • Whether old repairs or coatings need taking off

Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

It only takes a minute to photograph the damage. Try to send:

  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • A wider photo showing the whole bath or shower tray

For a price in Milton, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Repair or replace in Milton?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price reflects the work involved, not your postcode. You will see the full price before you book.

Why Milton clients choose us

  • We come to you, anywhere in the UK
  • No need to remove anything
  • Fixed prices from your photos
  • Generally one visit, start to finish

Read our pricing.

Do you need non-slip bath coating in Milton?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a picture:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

What your quote should include

  • What protection goes down before work starts
  • Who turns up on the day
  • How soon you can use it again
  • Whether they match the colour on site

Our hiring checklist

Your questions about non-slip bath coating in Milton

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

How do I get a price for non-slip bath coating in Milton?

We give a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.

Will the price change on the day?

The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Do you work in Milton?

We do. Repair technicians travel to Milton from across the region, with no extra charge for travel.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.