Pembrokeshire · Wales
Bath chip & crack repair in Milton, Pembrokeshire
We travel to Milton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- Chips under the taps
Bath repair at your home in Milton
Most of our bath repairs take a few hours, and you can typically bathe again the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Whether it’s a hole punched through by something heavy and rust spots around the plughole, we can typically put it right, on whirlpool & spa baths, pressed steel enamel and cast iron enamel alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Milton (SA70)
- Region
- Pembrokeshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We will not take on work that will not last, so these are the limits:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Where we work around Milton
Milton is about 8 miles east of Milford Haven, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
Our technicians cover all of SA70. From Paskeston Road and Milton Meadows or anywhere nearby, we can come to you. Nearby, we also work in Carew (1 mile north-east), Caeriw (1 mile north-east), Sageston (1 mile east), Mayeston (2 miles west) and Manorbier Newton (2 miles south). We also work in nearby towns such as Haverfordwest (9 miles north-west), Milford Haven (8 miles west), Pembroke (3 miles west), Pembroke Dock (4 miles west), The Marsh (9 miles north-west) and Dinbych-y-Pysgod (6 miles east).
What’s near Milton
Our clients here include homes close to St Mary's Church, Milton Brewery Inn and Sageston C.P. School and the streets around them. For rail, the closest station is Lamphey station, roughly 2.3 miles south-west. Well-known places in the area include South Pembrokeshire Hospital (5 miles west) and Carew Castle (0.5 miles north-east). For a walk, there is Mayeston Hill and Pembroke River upper.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Ensure the area is dry
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Ask for a price
Most customers in Milton get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Towns and villages near Milton
More services for Milton
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- How many items we do on one visit
- The material
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- Your postcode, so we can check dates
- One picture of the whole bath
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Common problems we fix in Milton
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
These are the problems we’re asked about most:
- A cracked acrylic bath
- Holes from dropped items
- Rust by the waste and overflow
- A chip where the taps sit
What your quote should include
- How changes to the job are handled
- How your room will be protected
- Aftercare advice
- When it can be used again
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
So the finish stays in good condition:
- Do not leave a fresh chip for long
- Ensure an acrylic bath is firm underfoot
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Questions from Milton
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens once I’ve sent pictures?
You will get a fixed quote back, normally with dates to choose from. There is no obligation to book.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is a cracked acrylic bath repairable?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
