Kent · England

Non-Slip Bath Coating for Monk's Hill homes

Fixed-price non-slip bath coating in Monk's Hill and the surrounding area, done in a single visit in most cases.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Monk's Hill

Non-slip bath coating in Monk's Hill without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. Typical jobs include resurfaced baths that are now too smooth and safety for older or less mobile people, across resurfaced baths, acrylic baths and wet room floors (ask us).

You get a one-year guarantee, the same in Monk's Hill as everywhere else we work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Monk's Hill (TN27)
Region
Kent
Cover
A year, on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Monk's Hill and nearby

Monk's Hill is about 9 miles west of Ashford, in Kent. Whether you are in the middle of Monk's Hill or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover 922 places across Kent, from the larger towns to small villages. We work right across the region, from Monk's Hill to London (about 41 miles away).

All of TN27 is within our area. That includes homes on The Cut and Smarden Road and the roads around them. Close by, we cover Standen (1 mile south-west), Smarden (1 mile north-east), Lashenden (1 mile west), Smarden Bell (1 mile north) and Curteis' Corner (1 mile south-west). We also work in nearby towns such as Maidstone (11 miles north-west), Ashford (9 miles east), Sittingbourne (14 miles north), Faversham (15 miles north-east), Kings Hill (15 miles north-west) and Davington (15 miles north-east).

What’s near Monk's Hill

We visit homes around Church of St Michael, Smarden Primary School and The Flying Horse pub, among other places. Monk's Hill’s nearest station is Headcorn station, about 2.5 miles north-west of the centre. Further afield, we also cover the area around Romden Castle (1.8 miles east) and Benenden Hospital (4.4 miles south-west).

Map of Monk's Hill © OpenStreetMap contributors

What affects the price in Monk's Hill

A fixed quote means you know the cost before you book. We look at:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • Access to the area
  • Doing more than one item at once

Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed quote

You can take the photos on your phone. Ensure they show:

  • A clear, close picture of the problem area
  • A photo taken from further back
  • Any details about the material
  • The postcode, so we can plan the visit

If you are in Monk's Hill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted
  • We come to you, anywhere in the UK
  • Fixed prices from your photos

Read our pricing.

FAQs for Monk's Hill

Can you quote from photos?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

What does non-slip bath coating cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

When to call us in Monk's Hill

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The most common problems we’re called about are:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

What your quote should include

  • What happens if the damage is worse than the photos show
  • How to look after the finish
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

Choosing a repair company

What we can’t put right

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

What we do, step by step

The work is clean and fairly quiet. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep a parking space free if you can
  • Let us know if it has been repaired before
  • Open a window if you can

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a fixed quote

Advice

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.