Kent · England
Bath Repair for Monk's Hill homes
Problem with your bath in Monk's Hill? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Deep scratches in acrylic
- Holes from dropped items
Monk's Hill: your questions answered
How long does the repair take to cure?
Normally within a day, depending on the repair.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Which areas do you work in?
All of Kent, and the rest of the UK. Travel is included in the price.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Bath repair in Monk's Hill without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair roll-top & freestanding, acrylic and pressed steel enamel, and common reasons people contact us are damage done while the bathroom was being fitted and hairline or through cracks in acrylic.
Big or small, you get the same one-year guarantee.
- Area
- Monk's Hill (TN27)
- County
- Kent
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- The type of damage
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- The material, if you know it
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Work for landlords and builders
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The process
Arrival times are agreed in advance. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Move bottles, mats and clutter away from the area
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you’re in Monk's Hill, and we’ll come back with a fixed quote.
Related advice
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Monk's Hill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- We come to you, anywhere in the UK
- We leave the room as we found it
- Fixed prices from your photos
- CHAS and Constructionline accredited
Read our full price list or resurfacing vs replacement cost guide.
Nearby places to Monk's Hill
Also in Monk's Hill
Monk's Hill and nearby
Monk's Hill is about 9 miles west of Ashford, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 922 places across Kent, from the larger towns to small villages. We work right across the region, from Monk's Hill to London (41 miles away).
Every address in TN27 is within our area, from the main roads to the quietest streets. You will find streets such as The Cut and Smarden Road, all of which we cover. Nearby, we also work in Standen (1 mile south-west), Smarden (1 mile north-east), Lashenden (1 mile west), Smarden Bell (1 mile north) and Curteis' Corner (1 mile south-west). Larger places within reach include Maidstone (11 miles north-west), Ashford (9 miles east), Sittingbourne (14 miles north), Faversham (15 miles north-east), Kings Hill (15 miles north-west) and Davington (15 miles north-east).
Landmarks near Monk's Hill
We visit homes around Church of St Michael, Smarden Primary School and The Flying Horse pub, among other places. The nearest railway station is Headcorn station, about 2.5 miles north-west of the centre. A little further out are Romden Castle (1.8 miles east) and Benenden Hospital (4.4 miles south-west).
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Do you need bath repair in Monk's Hill?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Look out for any of the following:
- Chips caused by builders
- Rusty patches near the plughole
- Holes from dropped items
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- Whether the price covers travel
- What happens if they find more damage
- Whether a trained technician does the job
- A fixed price, and whether VAT is included
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
