North Lincolnshire · England

Non-Slip Bath Coating for New Holland homes

Clear non-slip coatings for baths and shower trays in New Holland, carried out at your home and guaranteed for a year.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in New Holland

New Holland and nearby

New Holland is about 4 miles south of Kingston upon Hull, in North Lincolnshire. Jobs in New Holland are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in 90 places in North Lincolnshire. Our jobs stretch from New Holland to Leeds (about 49 miles away).

All of DN19 is covered, from the main roads to the quietest streets. That includes homes on Barrow Road, Westburn Avenue and Summercroft Avenue and the roads around them. Nearby, we also work in Barrow Hann (1 mile south), Barrow Haven (1 mile west), The Castles (1 mile south-west), Barrow upon Humber (2 miles south-west) and Goxhill (2 miles south-east). Larger places within reach include Scunthorpe (15 miles south-west), Barton-upon-Humber (3 miles west), Brigg (11 miles south-west), Frodingham (14 miles south-west), Crosby (14 miles south-west) and Broughton (12 miles south-west).

Around New Holland

Around New Holland, we work in homes near The Lincoln Castle Hotel, Christ Church and New Holland Church of England and Methodist Primary School and the streets around them. There is a railway station in New Holland itself: New Holland station. Other landmarks nearby include Barton upon Humber Castle (3.3 miles west) and Hull Royal Infirmary (3.3 miles north). Green spaces nearby include Far Ings National Nature Reserve.

Map of New Holland © OpenStreetMap contributors

How we handle non-slip bath coating in New Holland

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on resurfaced baths, shower trays and enamelled baths, and common reasons people contact us are a bath or tray that is slippery when wet and safety for older or less mobile people.

All our work is covered by a one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
New Holland (DN19)
Region
North Lincolnshire
Guarantee
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for New Holland. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • No need to remove anything
  • We’ll tell you if it’s not worth repairing
  • Most jobs done in one visit
  • We come to you, anywhere in the UK

Read our pricing.

New Holland questions

Are there extra charges for New Holland?

Travel is included in the price, with the same prices everywhere we work.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Will the price change on the day?

The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Do you cover New Holland?

We do. We send a technician to New Holland for every job, and the price is the same as everywhere else.

What does non-slip bath coating cost?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

How we price non-slip bath coating

Prices are worked out job by job. The main factors are:

  • How hard the colour is to match
  • How many areas need work
  • Access to the area
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Send photos for a quote

You can generally get a fixed price without us visiting. To help us price it:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath or shower tray
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in New Holland

  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Signs you need non-slip bath coating in New Holland

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

These are the problems we’re asked about most:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • What happens if they find more damage
  • Whether the colour is mixed to match
  • When it can be used again
  • How the room is protected while they work

Choosing a repair company

What we do, step by step

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Open a window if you can

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Advice

Work for landlords and builders

If you manage property in New Holland, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

Landlords, letting agents and housing providers in New Holland use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.