Staffordshire · England

Non-Slip Bath Coating in Oakamoor

Clear non-slip coatings for baths and shower trays for homes and businesses in Oakamoor and across Staffordshire. Free, fixed quotes from your pictures.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Oakamoor?

Non-slip bath coating in Oakamoor, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our repair technicians work on enamelled baths, resurfaced baths and shower trays, and common reasons people contact us are a bath or tray that is slippery when wet and worn-out textured areas.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Oakamoor (ST10)
Area hub
Staffordshire
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)

Landlords, agents and businesses in Oakamoor

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Oakamoor as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What happens on the day

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a morning or an afternoon.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Let us know which floor the room is on
  • Make sure the room can be ventilated
  • Keep children and pets away from the room on the day

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price without visiting.

Send photos for a quote

Read more

Do you need non-slip bath coating in Oakamoor?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Common reasons people in Oakamoor contact us include:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • How to care for the finish
  • Whether the price is fixed and includes VAT
  • What preparation is included

Our hiring checklist

Where we work around Oakamoor

Oakamoor is about 3 miles east of Cheadle, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Oakamoor is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Manchester, about 35 miles away.

Every address in ST10 is covered, from the main roads to the quietest streets. From Church Bank, Churnet View Road and Mill Road or a nearby road, we can come to you. Being close to the B5417, Oakamoor is simple for us to get to. Close by, we cover Cotton (1 mile north-east), Whiston (2 miles north-west), Upper Cotton (2 miles north), Broomyshaw (2 miles north) and Kingsley Holt (2 miles north-west). Within a short drive, we also cover Newcastle-under-Lyme (13 miles west), Longton (9 miles west), Stone (12 miles south-west), Leek (8 miles north-west), Biddulph (13 miles north-west) and Kidsgrove (14 miles north-west).

What’s near Oakamoor

Typical jobs here are in homes near The Valley Primary School and Church of the Holy Trinity, among other places. Other landmarks nearby include Cheadle Hospital (3 miles west) and Alton Castle (1.9 miles south-east). Not far away are Cotton Dell.

Map of Oakamoor © OpenStreetMap contributors

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Oakamoor

  • Same prices wherever you are
  • Honest advice, even when it means no job
  • Fixed prices from your photos
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our prices page.

What affects the price in Oakamoor

We charge the same across the UK, including Oakamoor. What changes the price is:

  • Unusual colours or finishes
  • How much damage there is
  • What kind of damage it is
  • The material

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send photos for a quote

You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:

  • A photo taken from further back
  • Something in shot to show the size
  • One sharp close-up of the damage
  • Any details about the material

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Oakamoor questions

What do you need from me?

Photos of the damage, a picture of the entire bath or shower tray and your postcode. After that, we just agree a date.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can you price it without visiting?

In nearly every case. If pictures don’t show enough, we will ask for another angle.

Do you work in Oakamoor?

Yes. We cover the whole UK and travel to Oakamoor. Send photos and we’ll quote, or call 0345 017 0787.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Oakamoor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.