Staffordshire · England
Bath chip & crack repair in Oakamoor, Staffordshire
Bath repair in and around Oakamoor: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
How we handle bath repair in Oakamoor
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Whether it’s a cracked acrylic bath and an old repair that has yellowed or come loose, we can help.
Every repair is covered by our one-year guarantee.
- Where
- Oakamoor (ST10)
- Region
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Oakamoor and nearby
Oakamoor is about 3 miles east of Cheadle, in Staffordshire. Anywhere in ST10, a technician comes to you. Oakamoor is one of 512 towns and villages in Staffordshire we cover. Our nearest city page is Manchester, about 35 miles away.
Every address in ST10 is within our area, from the main roads to the quietest streets. From Church Bank, Churnet View Road and Mill Road or a nearby road, we can come to you. You’ll find Oakamoor on the B5417, so it’s easy for us to reach. Nearby, we also work in Cotton (1 mile north-east), Whiston (2 miles north-west), Upper Cotton (2 miles north), Broomyshaw (2 miles north) and Kingsley Holt (2 miles north-west). Larger places within reach include Newcastle-under-Lyme (13 miles west), Longton (9 miles west), Stone (12 miles south-west), Leek (8 miles north-west), Biddulph (13 miles north-west) and Kidsgrove (14 miles north-west).
Local landmarks in Oakamoor
We visit homes around The Valley Primary School and Church of the Holy Trinity. Nearby you’ll also find Cheadle Hospital (3 miles west) and Alton Castle (1.9 miles south-east). The countryside around Oakamoor includes Cotton Dell.
What we can’t put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Oakamoor questions
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Do you work in Oakamoor?
Yes, we do. Repair technicians travel to Oakamoor from across the region, and the price is the same as everywhere else.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What affects the price in Oakamoor
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- The colour and finish to match
- How many areas need work
- Any earlier repairs that need removing first
- What kind of damage it is
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
Send us pictures of the damage and one of the entire item, and tell us you’re in Oakamoor, and we’ll reply with a fixed price.
Repairing versus replacing in Oakamoor
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Oakamoor. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Oakamoor customers choose us
- CHAS, Constructionline and SafeContractor accredited
- One price list for the entire UK
- Nothing taken out or refitted
- Free fixed quotes from pictures
See our pricing and bath cost comparison.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Looking after it afterwards
To keep it looking its best:
- Have new chips seen to early
- Do not scrub with anything abrasive
- Don’t leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Towns and villages near Oakamoor
More services for Oakamoor
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Oakamoor as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to two to three hours for most chips.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
How to get a price
For a price in Oakamoor, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
