Wiltshire · England
Non-Slip Bath Coating for Ogbourne St George homes
Our repair technicians come to Ogbourne St George for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Before we arrive
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Mention any parking restrictions or tricky access
Get a quote
Most customers in Ogbourne St George get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our non-slip bath coating in Ogbourne St George
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s safety for older or less mobile people and worn-out textured areas, we can typically put it right.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Ogbourne St George (SN8)
- Region
- Wiltshire
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Ogbourne St George
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Ogbourne St George, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Repairing versus replacing in Ogbourne St George
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why choose Surface Doctor in Ogbourne St George
- CHAS and Constructionline accredited
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
- We will tell you if it’s not worth repairing
See our pricing.
Also near Ogbourne St George
More services for Ogbourne St George
Covering Ogbourne St George
Ogbourne St George is about 8 miles south-east of Swindon, in Wiltshire. Wherever you are in the SN8 postcode area, a technician comes to you. Our technicians cover all 425 towns and villages in Wiltshire. We work right across the region, from Ogbourne St George to London (70 miles away).
We cover every part of the SN8 postcode area and the streets around it. Jobs here include addresses on High Street, Jubb's Lane and Liddiards Green. Neighbouring places we cover include Ogbourne St Andrew (1 mile south-west), Ogbourne Maizey (2 miles south-west), Marlborough (3 miles south), Manton (4 miles south-west) and Clatford (4 miles south-west). Within a short drive, we also cover Calne (13 miles west), Devizes (14 miles south-west), Pewsey (9 miles south), Lyneham (11 miles west), Wick (15 miles south-west) and Aldbourne (4 miles east).
Landmarks near Ogbourne St George
Locally, our jobs take us to homes close to The Inn with the Well, Church of St George and Ogbourne CofE Primary School and the streets around them. A little further out are The Merchants House (3.3 miles south) and Ogbourne St Andrew (1.5 miles south-west).
When a repair is not the answer
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Ogbourne St George
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
Common problems we fix in Ogbourne St George
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What your quote should include
- How long it needs to cure
- How your room will be protected
- What aftercare is recommended
- A fixed quote, and whether VAT is included
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Questions from Ogbourne St George
What areas do you cover?
We cover the entire UK, including Ogbourne St George and the rest of Wiltshire. Just include your postcode and we will offer you dates.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How we price non-slip bath coating
Prices are worked out job by job, from your photos. What matters most is:
- The size and number of damaged areas
- The material and finish
- Whether we combine several jobs
- What kind of damage it is
We charge the same wherever you are, with no extra for Ogbourne St George. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- Something in shot to show the size
- Natural light rather than flash
- What it’s made of, if you know
Email us a picture of the damage and one of the whole item, with your SN8 postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
