Wiltshire · England
Bath & shower resealing (mastic) in Ogbourne St George, Wiltshire
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Ogbourne St George and across Wiltshire. Free, fixed quotes from your photos.
- Missing sealant behind the taps
- Discoloured, yellow sealant
- Leaks at the edges
About our bath resealing in Ogbourne St George
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair kitchen worktops & sinks, wet rooms and shower trays & enclosures, and people most frequently call us about gaps by the taps and mould you can’t clean out.
Every repair is covered by our one-year guarantee, wherever you are in Wiltshire.
- Location
- Ogbourne St George (SN8)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
About Ogbourne St George
Ogbourne St George is about 8 miles south-east of Swindon, in Wiltshire. Anywhere in SN8, we carry out the work at your property. Ogbourne St George is one of 425 places in Wiltshire where we work. We work right across the region, from Ogbourne St George to London (about 70 miles away).
Here we cover the SN8 postcode area. Whether you live on High Street, Jubb's Lane and Liddiards Green or a nearby road, a technician can come to you. We also travel to Ogbourne St Andrew (1 mile south-west), Ogbourne Maizey (2 miles south-west), Marlborough (3 miles south), Manton (4 miles south-west) and Clatford (4 miles south-west). Within a short drive, we also cover Calne (13 miles west), Devizes (14 miles south-west), Pewsey (9 miles south), Lyneham (11 miles west), Wick (15 miles south-west) and Aldbourne (4 miles east).
Local landmarks in Ogbourne St George
Around Ogbourne St George, we work in homes near The Inn with the Well, Church of St George and Ogbourne CofE Primary School and the streets around them. Nearby you will also find The Merchants House (3.3 miles south) and Ogbourne St Andrew (1.5 miles south-west).
How to care for the repair
Simple care helps the repair last. Our advice:
- Wipe the joints dry after use
- Clean the sealant gently and regularly
- Ventilate the bathroom well
- Reseal when black spots will not clean off
Good ventilation is the best protection, and dry the joints after bathing to keep mould away.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- The type of damage
- The material
- Whether we combine several jobs
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Any earlier repairs or coatings
- One picture of the whole bath or shower
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water damage behind the bath that needs a builder
- Gaps too big for silicone alone
- Hollow or loose tiles
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Towns and villages near Ogbourne St George
More services for Ogbourne St George
Landlords, agents and businesses in Ogbourne St George
Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Ogbourne St George, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- Everything repaired in place
- One visit for most repairs
- One price list for the entire UK
- Dust sheets down, tidy finish
Read our full price list.
Questions from Ogbourne St George
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Why does my sealant keep going mouldy?
Damp is the cause. Ventilation and drying keep it clean longer.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
When can I use the bath after resealing?
We’ll give you the curing time, typically around a day.
What happens next?
You’ll get a fixed quote back. You are under no obligation.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to around two hours.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say straight away whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
