Bridgend · Wales

Non-Slip Bath Coating in Ogmore Vale

Non-slip bath coating for Ogmore Vale, without a refit. Get a fixed price from your pictures, then book a visit.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Ogmore Vale?

Where we work around Ogmore Vale

Ogmore Vale (Welsh: Cwm Ogwr) is about 4 miles south-west of Rhondda, in Bridgend. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Ogmore Vale is one of 91 towns and villages in Bridgend where we work.

Jobs in CF32 are booked in the same way as anywhere else. From High Street, Railway Terrace and Blandy Terrace or anywhere nearby, a technician can come to you. Close by, we cover Wyndham (1 mile north), Price Town (1 mile north), Nant-y-moel (2 miles north), Pontycymer (2 miles north-west) and Blaengarw (3 miles north-west). Further out, we also cover Bridgend (6 miles south), Maesteg (5 miles west), Porthcawl (11 miles south-west), Newcastle Higher (7 miles south), Ynysawdre (4 miles south-west) and Pencoed (5 miles south).

Near you in Ogmore Vale

Locally, our jobs take us to homes close to Ogmore Vale Primary, Fox & Hounds pub and St David's Church and the streets around them. Ogmore Vale’s nearest station is Ton Pentre station, about 4.1 miles north-east. Nearby you will also find Llwynypia Hospital (4.8 miles north-east) and Moel Garn (1.4 miles north-west). The countryside around Ogmore Vale includes Pant Blaenhirwr.

Map of Ogmore Vale © OpenStreetMap contributors

How we handle non-slip bath coating in Ogmore Vale

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on enamelled baths, wet room floors (ask us) and acrylic baths, and people most often call us about worn-out textured areas and bath mats that harbour mould or get forgotten.

Every repair is covered by a one-year guarantee, wherever you are in Bridgend. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Ogmore Vale (CF32)
Area hub
Bridgend
Warranty
12 months on all our work
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Your questions about non-slip bath coating in Ogmore Vale

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Ogmore Vale.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we’ll plan for it.

Do the materials smell?

Expect a mild smell while we’re working, which fades afterwards.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

The process

You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park
  • Let the surface dry out before the visit

How to get a price

Upload photos of the damage and one of the entire item, and tell us you’re in Ogmore Vale, and we will come back with a fixed quote.

Send photos for a quote

Advice

Do you need non-slip bath coating in Ogmore Vale?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Clients typically contact us about:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • When it can be used again
  • How the colour is matched

Our hiring checklist

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

When we would advise against a repair

A repair isn’t right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths

What non-slip bath coating costs

Quotes are free and the price is fixed. What we look at:

  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • Whether we combine several jobs

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

You can normally get a fixed price without us visiting. To help us price it:

  • Details of any past repairs
  • The material, if you know it
  • Natural light rather than flash
  • One sharp close-up of the damage

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Repairing versus replacing in Ogmore Vale

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.

Why us?

  • A year’s guarantee on all work
  • One visit for most repairs
  • Work done at your home or business
  • Same prices wherever you are

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.