Shropshire · England

Non-slip bath & shower coating in Ollerton, Shropshire

Non-slip bath coating in Ollerton without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Ollerton homes

Non-slip bath coating at your home in Ollerton

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair resurfaced baths, wet room floors (ask us) and shower trays, and the jobs we see most are a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Ollerton (TF9)
Region
Shropshire
Cover
12 months on all our work
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlord and trade work in Ollerton

For anyone letting property in or around Ollerton, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

When we’d advise against a repair

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

Materials we repair

  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

How it works

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Open a window if you can
  • Let the surface dry out before the visit
  • Clear toiletries, mats and anything else from around the area

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Read more

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Ollerton customers choose us

  • We will tell you if it’s not worth repairing
  • Rooms protected and left tidy
  • No extra charge for your area
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing.

Ollerton: your questions answered

What areas do you cover?

The whole UK, including all of Shropshire. Send your postcode with your photos and we will offer you dates.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What happens once I’ve sent photos?

You get a fixed price and available dates. If we need another angle, we’ll ask.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

How do I get a price for non-slip bath coating in Ollerton?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Ollerton and the surrounding area

Ollerton is about 5 miles south of Market Drayton, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Ollerton is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 36 miles away.

Jobs in TF9 are booked in the same way as anywhere else. If you’re just outside Ollerton, we cover Peplow (1 mile west), Eaton upon Tern (1 mile south), Stoke-on-Tern (2 miles north), Rosehill (2 miles north) and Stoke Heath (3 miles north). Within a short drive, we also cover Shrewsbury (13 miles south-west), Madeley (13 miles south), Market Drayton (5 miles north), Coleham (13 miles south-west), Kingsland (13 miles south-west) and Whitchurch (12 miles north-west).

What’s near Ollerton

Locally, our jobs take us to homes close to Church of St Michael and the streets around them. Not far away are Quarry Wood.

Map of Ollerton © OpenStreetMap contributors

What we are called out for in Ollerton

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The most common problems we’re called about are:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • Whether cleaning and preparation are in the price
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • Whether the price covers travel

10 questions to ask before booking

What non-slip bath coating costs

We price every job individually. What matters most is:

  • Access to the area
  • The material
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your photos

You can take the pictures on your phone. Make sure they show:

  • A clear, close picture of the problem area
  • Natural light rather than flash
  • Where you are, by postcode
  • A coin beside the damage so we can judge size

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.