Shropshire · England

Non-slip bath & shower coating in Stoke-on-Tern, Shropshire

Fixed-price non-slip bath coating in Stoke-on-Tern and the surrounding area, typically in one visit and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Stoke-on-Tern homes

Non-slip bath coating at your home in Stoke-on-Tern

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Whether it’s safety for older or less mobile people and resurfaced baths that are now too smooth, we can typically put it right, whatever the material.

A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Where
Stoke-on-Tern (TF9)
Region
Shropshire
Warranty
A year, on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Where we work around Stoke-on-Tern

Stoke-on-Tern is about 4 miles south-west of Market Drayton, in Shropshire. Jobs in Stoke-on-Tern are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 433 towns and villages across Shropshire. You can also see our page for Birmingham, about 38 miles away.

Our technicians cover all of the TF9 postcode area and the streets around it. Close by, we cover Stoke Heath (1 mile north), Rosehill (1 mile north-east), Hodnet (2 miles west), Wollerton (2 miles north-west) and Ollerton (2 miles south). Within a short drive, we also cover Shrewsbury (13 miles south-west), Madeley (15 miles south), Market Drayton (4 miles north-east), Coleham (14 miles south-west), Kingsland (14 miles south-west) and Whitchurch (10 miles north-west).

Around Stoke-on-Tern

Typical jobs here are in homes near Church of St Peter and Stoke-on-Tern Primary School, among other places. Further afield, we also cover the area around Red Castle (4.4 miles west). Green spaces nearby include Hawk Lake and Quarry Wood.

Map of Stoke-on-Tern © OpenStreetMap contributors

What we cannot put right

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Acrylic baths

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why us?

  • Repair technicians who travel to you, UK-wide
  • CHAS and Constructionline accredited
  • Same prices wherever you are
  • A fixed quote before you book

Read our full price list.

What non-slip bath coating costs

We price every job individually. What matters most is:

  • The material and finish
  • What kind of damage it is
  • Doing more than one item at once
  • Where the damage is and how we get to it

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Getting a price from photos

You can usually get a fixed quote without us visiting. To help us price it:

  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Common problems we fix in Stoke-on-Tern

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Look out for any of the following:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • How long it needs to cure
  • What happens if the damage is worse than the photos show
  • Whether a trained technician does the job
  • What the guarantee covers, and for how long

10 questions to ask before you book

Common questions in Stoke-on-Tern

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

How much does non-slip bath coating cost in Stoke-on-Tern?

Because every job differs, we price from photos. You will get a fixed figure before you book.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Do you work in Stoke-on-Tern?

Yes. We work across the UK and come to Stoke-on-Tern and the rest of Shropshire. Send pictures and we will quote, or call 0345 017 0787.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

How the visit works

You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It typically takes a few hours, and you can get on with other things while we are there.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings

Get a quote

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a fixed quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.