Glasgow · Scotland

Non-slip bath & shower coating in Parkhead, Glasgow

Non-slip bath coating across Parkhead and nearby, usually in one visit and guaranteed for a year.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Parkhead?

Non-slip bath coating in Parkhead, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We regularly repair enamelled baths, wet room floors (ask us) and acrylic baths, and people most frequently call us about bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Parkhead (G31, G32, G40)
Region
Glasgow
Guarantee
A year, on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Signs you need non-slip bath coating in Parkhead

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • How the colour is matched
  • How the room is protected while they work
  • When it can be used again
  • Who will actually do the work

How to compare quotes

Landlord and trade work in Parkhead

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we repair

  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

The process

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a few hours in most cases. We leave the room clean and you will know when it can be used.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Let us know about parking or access
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Ask for a price

Most clients in Parkhead get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Advice

Covering Parkhead

Parkhead is about 3 miles north-west of Cambuslang, in Glasgow. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Parkhead is one of 183 towns and villages in Glasgow where we work.

Here we cover the G31, G32 and G40 postcode area. From Perth Lane, Delhi Lane and London Road or a nearby road, we can come to you. We also travel to Lilybank (1 mile south-east), Carntyne (1 mile north-east), Shettleston (1 mile east), Tollcross (1 mile east) and Auchenshuggle (1 mile south-east). Larger places within reach include Glasgow (3 miles west), Hillhead (4 miles north-west), Dowanhill (4 miles north-west), Woodlands (3 miles north-west), Woodside (3 miles north-west) and North Kelvinside (4 miles north-west).

What’s near Parkhead

Our clients here include homes close to Parkhead Library, St Mungo's Academy and St Andrew's Secondary School, among other places. For rail, the closest station is Carntyne station, roughly 0.8 miles north-east of the centre. Well-known places in the area include Farme Castle (1 mile south) and Belvidere Hospital (under half a mile south). For a walk, there is Hogganfield Loch and Cathkin Braes.

Map of Parkhead © OpenStreetMap contributors

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Parkhead. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • We’ll tell you if it’s not worth repairing
  • Same prices wherever you are
  • One visit for most repairs
  • We come to you, anywhere in the UK

See our prices page.

Parkhead questions

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

What happens if you find more damage?

The price is fixed for what the photos show. If there’s more, we will tell you before starting.

What information do you need?

Use the quote form or ring 0345 017 0787.

Do you cover Parkhead?

Yes, we do. We send a technician to Parkhead for every job, and the price is the same as everywhere else.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What non-slip bath coating costs

There’s no area surcharge for Parkhead. What changes the price is:

  • Whether we combine several jobs
  • How much damage there is
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • Any details about the material
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You will get a fixed quote, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.