Suffolk · England
Non-Slip Bath Coating for Pin Mill homes
Non-slip bath coating across Pin Mill and nearby, normally in one visit and guaranteed for a year.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
Do you need non-slip bath coating in Pin Mill?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Clients typically contact us about:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- How the colour is matched
- If travel is included in the price
- Who will actually do the work
- How long it needs to cure
Non-slip bath coating in Pin Mill without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on acrylic baths, wet room floors (ask us) and resurfaced baths, and common reasons people get in touch are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Pin Mill (IP9)
- County
- Suffolk
- Guarantee
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Pin Mill
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Pin Mill, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Prices and what affects them
There is no area surcharge for Pin Mill. The price reflects:
- How much damage there is
- Previous DIY repairs that have to come out
- Access to the area
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- A clear, close picture of the problem area
- Natural light rather than flash
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Repairing versus replacing in Pin Mill
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Pin Mill
- Technicians who travel to you, UK-wide
- Generally one visit, start to finish
- Every repair guaranteed for a year
- Rooms protected and left tidy
See our full price list.
About Pin Mill
Pin Mill is about 4 miles south-east of Stoke, in Suffolk. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Pin Mill is one of 731 places in Suffolk we cover. Our nearest city page is London, about 66 miles away.
Jobs in IP9 work the same way as everywhere else we cover. We also cover the places around Pin Mill: Chelmondiston (1 mile south-west), Shotley Common (1 mile south-east), Erwarton (2 miles south), Church End (2 miles south-east) and Shop Corner (2 miles south). We also work in nearby towns such as Ipswich (5 miles north-west), Felixstowe (6 miles east), Kesgrave (5 miles north), Woodbridge (8 miles north-east), Hadleigh (11 miles west) and Stoke (4 miles north-west).
Around Pin Mill
Typical jobs here are in homes near Woolverstone Hall School, Holliwood High School and Bridge Wood, among other places. Nearby too are The Butt and Oyster pub (under half a mile north), Saint Andrew's Church (within half a mile south) and Chelmondiston Church of England Primary School (within half a mile south-west). Pin Mill’s nearest station is Harwich International station, about 3.8 miles south-east. A little further out are St Clement's Hospital (3.9 miles north) and Museum of Knots & Sailors Ropework (3.9 miles north-west). The countryside around Pin Mill includes Levington Lagoon and Alton Water.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Nearby places to Pin Mill
Also in Pin Mill
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Read more
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Pin Mill
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
Your questions about non-slip bath coating in Pin Mill
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Pin Mill.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
