Wiltshire · England

Non-Slip Bath Coating in Poulshot

Fixed-price non-slip bath coating in Poulshot and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Poulshot homes

How we handle non-slip bath coating in Poulshot

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair resurfaced baths, enamelled baths and acrylic baths, and common reasons people get in touch are resurfaced baths that are now too smooth and worn-out textured areas.

We stand behind the work with a one-year guarantee, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Poulshot (SN10)
Area hub
Wiltshire
Cover
12 months on all our work
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What we cannot put right

We’ll always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths

Poulshot: your questions answered

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we will plan for it.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Is there a guarantee?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Do you cover the whole of Wiltshire?

We work UK-wide. Prices don’t change with location.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.

Why book with us

  • We come to you, anywhere in the UK
  • Honest advice, even when it means no job
  • A year’s guarantee on all work
  • Dust sheets down, tidy finish

See our pricing.

Landlords, agents and businesses in Poulshot

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

How we price non-slip bath coating

Each job gets its own fixed price. This is what makes a difference:

  • Any earlier repairs that need removing first
  • The colour and finish to match
  • Where the damage is and how we get to it
  • What the surface is made of

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • A wider photo showing the entire bath or shower tray

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Covering Poulshot

Poulshot is about 3 miles west of Devizes, in Wiltshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 425 places across Wiltshire. Our jobs stretch from Poulshot to Birmingham (about 78 miles away).

Our visits in SN10 are booked in the same way as anywhere else. You will find streets such as Aubreys Yard, Sillington Lane and Barley Hill Lane, and we cover them all. We also travel to Townsend (1 mile south-west), Martinslade (1 mile north-west), Rowde (2 miles north), Sells Green (2 miles north-west) and Seend (2 miles west). Further out, we also cover Trowbridge (7 miles west), Chippenham (9 miles north-west), Calne (7 miles north), Devizes (3 miles east), Westbury (8 miles south-west) and Melksham (4 miles north-west).

Local landmarks in Poulshot

We visit homes around Church of St Peter and the streets around them. Well-known places in the area include Devizes Community Hospital (2.4 miles north-east) and Kennet (2.2 miles east). Open spaces near Poulshot include King's Play Hill.

Map of Poulshot © OpenStreetMap contributors

What happens on the day

You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It generally takes a few hours, and you can get on with other things while we’re there.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know about parking or access
  • Keep a parking space free if you can

Getting a price

Email us a photo of the damage and one of the entire item, and tell us you are in Poulshot, and we will reply with a fixed price.

Get a fixed quote

Advice

Common problems we fix in Poulshot

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Customers normally contact us about:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • A fixed price, and whether VAT is included
  • Whether there are any call-out or travel charges
  • What happens if they find more damage
  • What preparation is included

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.