Kent · England
Non-slip bath & shower coating in Reculver, Kent
Non-slip bath coating in Reculver without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Reculver
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Reculver (CT6)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
You’ll know the full cost before booking. We look at:
- Whether old repairs or coatings need taking off
- The material and finish
- Access to the area
- Doing more than one item at once
Our prices are the same across the UK, with no extra for Reculver. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- One picture of the entire bath or shower tray
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Most clients in Reculver get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Do you need non-slip bath coating in Reculver?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
What your quote should include
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- Who turns up on the day
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Reculver clients choose us
- One visit for most repairs
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Honest advice, even when it means no job
Read our pricing.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Also near Reculver
Also in Reculver
Reculver: your questions answered
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
What we work on
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
- Acrylic baths
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Our work in Reculver
Reculver is about 3 miles east of Herne Bay, in Kent. Clients in Reculver get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 922 places across Kent. Our nearest city page is London, about 56 miles away.
Our repair technicians cover all of the CT6 postcode area. Local streets include Reculver Lane and Cherry Blossom Drive, and we cover them all. Other places close to Reculver include Bishopstone (1 mile west), Hillborough (1 mile south-west), Hawthorn (2 miles south-west), Beltinge (2 miles west) and Highstead (2 miles south-west). We also work in nearby towns such as Canterbury (8 miles south-west), Margate (8 miles east), Ramsgate (10 miles east), Broadstairs (10 miles east), Whitstable (7 miles west) and Deal (14 miles south-east).
Landmarks near Reculver
Typical jobs here are in homes near St Mary's Church, The King Ethelbert Inn and Bishopstone Cliffs. The nearest railway station is Herne Bay station, roughly 3.5 miles west of the centre.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
