Kent · England

Non-Slip Bath Coating for Rhodes Minnis homes

We travel to Rhodes Minnis for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Rhodes Minnis

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Non-slip bath coating at your home in Rhodes Minnis

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include resurfaced baths that are now too smooth and worn-out textured areas, on resurfaced baths, shower trays and acrylic baths.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Rhodes Minnis (CT4)
Region
Kent
Cover
One year on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What affects the price in Rhodes Minnis

We don’t charge extra for travel to Rhodes Minnis. The price depends on:

  • The material and finish
  • Any earlier repairs that need removing first
  • How many areas need work
  • How easy the damage is to reach

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A wider photo showing the whole bath or shower tray
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

Your questions about non-slip bath coating in Rhodes Minnis

What happens once I’ve sent pictures?

We review the photos and send a fixed quote with dates.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before and we’ll plan for it.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How much does non-slip bath coating cost in Rhodes Minnis?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Covering Rhodes Minnis

Rhodes Minnis is about 5 miles north of Hythe, in Kent. Wherever you are in the CT4 postcode area, we carry out the work at your property. We cover 922 places in Kent, from the larger towns to small villages. Our nearest city page is London, about 56 miles away.

Here we cover the CT4 postcode area. That includes homes on Longage Hill and Green Lane. We also travel to Woodland (1 mile south-west), Ottinge (1 mile east), Hemsted (1 mile south-west), Lyminge (1 mile south-east) and Skeete (1 mile south-west). Further out, we also cover Ashford (9 miles west), Canterbury (9 miles north), Dover (10 miles east), Folkestone (6 miles south-east), Whitstable (14 miles north) and Deal (15 miles east).

Local landmarks in Rhodes Minnis

The closest station to Rhodes Minnis is Sandling station, roughly 3.8 miles south of the centre. Further afield, we also cover the area around Royal Victoria Hospital (5.8 miles south-east) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south-east). The countryside around Rhodes Minnis includes Tolsford Hill.

Map of Rhodes Minnis © OpenStreetMap contributors

When we would advise against a repair

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays

Repair or replace in Rhodes Minnis?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Nothing taken out or refitted
  • A year’s guarantee on all work
  • Work done at your home or business
  • Dust sheets down, tidy finish

Read our full price list.

How the visit works

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you can get on with other things while we’re there.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Point us to the nearest place to park
  • Make sure the area is dry
  • Mention any parking restrictions or tricky access

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

Send pictures for a quote

Related advice

Do you need non-slip bath coating in Rhodes Minnis?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

People normally call us when they notice something like this:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Comparing quotes

  • How your room will be protected
  • A fixed quote, and whether VAT is included
  • Whether they match the colour on site
  • Whether a trained technician does the job

10 questions to ask before you book

Landlord and trade work in Rhodes Minnis

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in Rhodes Minnis use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.