Hertfordshire · England

Non-slip bath & shower coating in Ridge, Hertfordshire

Clear non-slip coatings for baths and shower trays at your home in Ridge, with a one-year guarantee on every repair.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Ridge homes

How we handle non-slip bath coating in Ridge

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for worn-out textured areas and resurfaced baths that are now too smooth, in acrylic baths, enamelled baths and wet room floors (ask us).

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Ridge (EN6)
Area hub
Hertfordshire
Cover
One year on every repair
Price
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we do, step by step

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Clear the area around the damage
  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available

Getting a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Send photos for a quote

Read more

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For landlords and businesses

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in Ridge use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

What we’re called out for in Ridge

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • Whether a trained technician does the job
  • What preparation is included
  • Whether they match the colour on site
  • Aftercare advice

Our hiring checklist

What a repair cannot fix

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

Common questions in Ridge

What happens if you find more damage?

The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.

Are there extra charges for Ridge?

No. Our quotes include travel, with the same prices everywhere we work.

How much does non-slip bath coating cost in Ridge?

Because every job differs, we price from photos. You’ll get a fixed figure before you book.

Is there a guarantee?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

What happens after I send pictures?

We come back with a fixed price. You are under no obligation.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • We leave the room as we found it
  • One price list for the entire UK
  • One visit for most repairs
  • Honest advice, even when it means no job

Take a look at our full price list.

Ridge and nearby

Ridge is about 2 miles north-east of Borehamwood, in Hertfordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 381 places in Hertfordshire. We work right across the region, from Ridge to London (15 miles away).

Here we cover the EN6 postcode area. You will find streets such as Crossoaks Lane, Deeves Hall Lane and Blanche Lane. Close by, we cover South Mimms (1 mile north-east), Dancers Hill (1 mile south-east), Well End (1 mile south), Green Street (2 miles south-west) and Shenley (2 miles west). We also work in nearby towns such as Watford (7 miles west), Hemel Hempstead (10 miles north-west), Stevenage (15 miles north), St Albans (6 miles north-west), Welwyn Garden City (8 miles north) and Harpenden (10 miles north-west).

What’s near Ridge

We visit homes around Dame Alice Owen's School, St Giles' CofE Primary School and North Mimms Park, among other places. Also close by are The Old Guinea pub (less than half a mile south-west), Church of St Margaret (within half a mile west) and Manor Lodge School (1.4 miles north-west). The closest station to Ridge is Potters Bar station, roughly 2.3 miles east. A little further out are Hilfield Castle (4.6 miles south-west) and Hertfordshire Scout Museum (1.4 miles south-west). For a walk, there’s Darland's Lake and Furzefield Wood and Lower Halfpenny.

Map of Ridge © OpenStreetMap contributors

What non-slip bath coating costs

Every quote is fixed and free. What we take into account:

  • How much damage there is
  • Previous DIY repairs that have to come out
  • The type of damage
  • How many items we do on one visit

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Send photos for a quote

Before you send pictures, these tips help us give you a firm price:

  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • A photo taken from further back

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.