Herefordshire · England

Non-Slip Bath Coating for Ross-on-Wye homes

Non-slip bath coating in and around Ross-on-Wye: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Ross-on-Wye homes

About our non-slip bath coating in Ross-on-Wye

The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on wet room floors (ask us), resurfaced baths and shower trays, and common reasons people contact us are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Ross-on-Wye (HR9)
Area hub
Herefordshire
Guarantee
One year on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What we’re called out for in Ross-on-Wye

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Most people contact us after spotting one of these:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

What to look for in a quote

  • What the guarantee covers, and for how long
  • Aftercare advice
  • How your room will be protected
  • How the colour is matched

10 questions to ask before you book

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Ross-on-Wye

  • Free fixed quotes from pictures
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • One price list for the entire UK

See our prices page.

Common questions in Ross-on-Wye

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

Is there any odour?

Expect a mild smell while we are working.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

What a repair cannot fix

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths

The process

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It normally takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Mention any parking restrictions or tricky access
  • Have somewhere for us to park nearby if possible
  • Mention any earlier repairs or resurfacing

Getting a price

Upload pictures of the damage and one of the whole item, with your HR9 postcode, and we will come back with a fixed quote.

Send pictures for a quote

Advice

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

What affects the price in Ross-on-Wye

We price every job individually, from your photos. What matters most is:

  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • How many areas need work
  • What the surface is made of

A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

How to get a fixed price

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Something in shot to show the size
  • One picture of the entire bath or shower tray
  • Any details about the material
  • Where you are, by postcode

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You will get a fixed quote, not an estimate.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Covering Ross-on-Wye

Ross-on-Wye is about 11 miles south-east of Hereford, in Herefordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in all 255 towns and villages across Herefordshire. You can also see our page for Birmingham, about 48 miles away.

Here we cover the HR9 postcode area. Local streets include Market Place, High Street and Crofts Lane. With the A40 and A449 close by, Ross-on-Wye is simple for us to get to. We also cover the places around Ross-on-Wye: Merrivale (1 mile south), Brampton Abbotts (2 miles north), Weston under Penyard (2 miles east), Old Gore (3 miles north-east) and Stocking (4 miles north). Larger places within reach include Hereford (11 miles north-west), Ledbury (11 miles north-east), Redhill (11 miles north-west), Newton Farm (11 miles north-west), Whitecross (12 miles north-west) and Eign Hill (11 miles north-west). Being one of Herefordshire’s larger places, Ross-on-Wye sees plenty of our work.

Landmarks near Ross-on-Wye

Around Ross-on-Wye, we work in homes near Ashfield Park Primary School, Church of St Mary the Virgin and John Kyrle High School and Sixth Form Centre Academy, among other places. Further afield, we also cover the area around Railways In Miniature Museum (under half a mile south-west) and Wilton Castle (0.6 miles west). Not far away are Chase Wood Hill and Wigpool.

Map of Ross-on-Wye © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.