Leicestershire · England

Non-Slip Bath Coating for Sapcote homes

Non-slip bath coating across Sapcote and nearby, done in a single visit in most cases and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Sapcote homes

Non-slip bath coating at your home in Sapcote

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include worn-out textured areas and safety for older or less mobile people, on shower trays, enamelled baths and acrylic baths.

All our work is covered by a one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Sapcote (LE9)
County
Leicestershire
Warranty
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Honest limits

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Covering Sapcote

Sapcote is about 4 miles east of Hinckley, in Leicestershire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Sapcote is one of 287 places in Leicestershire where we work. Our nearest city page is Birmingham, about 26 miles away.

All of LE9 is within our area. You’ll find streets such as Kirby Close, Stanton Road and Buckwell Road. If you’re just outside Sapcote, we cover Stoney Stanton (1 mile north), Sharnford (1 mile south-west), Potters Marston (2 miles north), Sutton in the Elms (2 miles east) and Croft (2 miles north-east). Within a short drive, we also cover Hinckley (4 miles west), Wigston (8 miles north-east), Coalville (13 miles north), Syston (14 miles north-east), Lutterworth (6 miles south-east) and Blaby (5 miles north-east).

Local landmarks in Sapcote

We visit homes around All Saints Church of England Primary School, Thomas Estley Community College and Bulls Head pub. Sapcote’s nearest station is Hinckley station, about 3.8 miles west of the centre. Other landmarks nearby include Hinckley and District Museum (3.9 miles west). Not far away are Stoney Cove and Croft Hill.

Map of Sapcote © OpenStreetMap contributors

How it works

Arrival times are agreed in advance, so you are not left guessing. On site, it takes a morning or an afternoon. We leave the room clean.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Getting a price

Email us photos of the damage and one of the entire item, with your LE9 postcode, and we’ll come back with a fixed quote.

Get a fixed quote

Related advice

For landlords and businesses

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

How we price non-slip bath coating

You will know the full cost before you book. We look at:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • The type of damage

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Quotes from your photos

It only takes a minute to photograph the damage. Please include:

  • Daylight if possible, and no flash reflection
  • One picture of the whole bath or shower tray
  • The material, if you know it
  • Whether it’s been repaired or coated before

To get a price, send two or three photos through our quote form or call us. We will say right away if a repair is the right fix.

What we are called out for in Sapcote

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Clients generally contact us about:

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people

Before you book anyone

  • How your room will be protected
  • Whether a trained technician does the job
  • Whether they match the colour on site
  • How long the guarantee is and what it covers

Our hiring checklist

Questions from Sapcote

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Do you work in Sapcote?

Yes, we do. Repair technicians travel to Sapcote from across the region, with no extra charge for travel.

What happens next?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

How do I get a price for non-slip bath coating in Sapcote?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Repairing versus replacing in Sapcote

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • One price list for the entire UK
  • No need to remove anything
  • Honest advice, even when it means no job
  • Most jobs done in one visit

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.