Cheshire West and Chester · England
Non-slip bath & shower coating in Sealand, Cheshire West and Chester
Clear non-slip coatings for baths and shower trays for homes and businesses in Sealand and across Cheshire West and Chester. Free, fixed quotes from your pictures.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
Prices and what affects them
You will not pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- What the surface is made of
- How many items we do on one visit
The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Quotes from your photos
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath or shower tray
- Where you are, by postcode
Most customers in Sealand get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
About our non-slip bath coating in Sealand
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can usually put it right, on acrylic baths, resurfaced baths and wet room floors (ask us) alike.
A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Sealand (CH1, CH5)
- Area hub
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Sealand
Other services in Sealand
Our work in Sealand
Sealand is about 4 miles west of Chester, in Cheshire West and Chester. Anywhere in CH1, we come to you. We work in all 224 towns and villages in Cheshire West and Chester. Our jobs stretch from Sealand to Liverpool (about 14 miles away).
We work across the CH1 and CH5 postcode area. From Green Lane East, St Bartholomews Court and Sealand Road or anywhere nearby, a technician can come to you. We also travel to Saughall (1 mile north-east), Blacon (2 miles east), Shotwick (2 miles north-west), Mollington (2 miles north-east) and Woodbank (3 miles north). We also work in nearby towns such as Chester (4 miles east), Ellesmere Port (5 miles north-east), Neston (6 miles north-west), Boughton (4 miles south-east), Frodsham (12 miles north-east) and Hoole (5 miles east).
Local landmarks in Sealand
In Sealand, that means homes near St Bartholomew's Church, The Greyhound pub and Saughall All Saints Church of England Primary School and the streets around them. The nearest railway station is Hawarden Bridge station, about 2.6 miles west. A little further out are Broughton Shopping Park (3.1 miles south) and West Saltney (1.5 miles south-west). Green spaces nearby include Shotwick Lake and Burton Mere Wetlands.
Landlords, agents and businesses in Sealand
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
When to call us in Sealand
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
These are the problems we’re asked about most:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Before you book anyone
- Who turns up on the day
- How the room is protected while they work
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Common questions in Sealand
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How much does non-slip bath coating cost in Sealand?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
Take a look at our prices page.
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we work on in Sealand
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
About our accreditations · Every repair comes with a one-year guarantee.
